Bosch BGS 6PRO4 - Инструкция по эксплуатации - Страница 47

45

Figure 

26

If the plate filter is par ticularly dir ty, it can also be 
rinsed clean.

‡

 Turn the bottom par t of the filter system clockwise 
as far as the stop.

‡

 Remove the plate filter from the filter system.

‡

 Rinse the filter under running water.

‡

 When it has dried completely, inser t the plate filter 
into the filter system and lock the bottom par t by 
turning it anticlockwise.

Under normal circumstances, and the appliance is 
used as intended for household cleaning, the plate fil-
ter does not need to be removed or cleaned manually 
in order to achieve the optimum power level. 

!

  Do not brush the filter.

‡

 For simple dr y cleaning, simply tap the filter around 
the edge of the cap.

‡

 For more thorough cleaning, rinse the filter from 
the outside with water, and allow it to dr y comple -
tely before using it in the vacuum cleaner again.

Figure 

27

a) 

 Unlock the dust container and take it out of the 
appliance. 

b) 

 Take the filter unit out of the dust container. 

c) 

 Clean the fluff filter.

When emptying the dust container, always check how 
dir ty the fluff filter is and, if necessar y, clean it as 
detailed in the “Cleaning the fluff filter” instructions. 

Cleaning the fluff filter

The fluff filter should be cleaned at regular inter vals 
in order to ensure optimum operation of the vacuum 
cleaner. It is usually suf ficient to lightly shake or tap 
out the filter housing when the dust container is emp-
tied in order to dislodge any par ticles of dir t.

!

  Caution: the fluff filter must not be cleaned under 

running water.

The (H)EPA filter is designed so that it does not need 
to be replaced if the appliance is used as intended for 
household cleaning. To ensure that the vacuum clea-
ner keeps working at its optimum per formance level, 
the (H)EPA filter should be rinsed clean after approx. 
3 years. The filtering effect of this filter in maintained, 
even though the filter sur face may become discolou-
red. 

* Dependent on model 

Rinsing the (H)EPA filter

Figure 

28

a) 

 Open the exhaust grille by pressing the release 
button.

b) 

 Unlock the (H)EPA filter by pressing the locking tab 
and remove it from the appliance.

c) 

 Tap out the (H)EPA filter and rinse under running 
water

d) 

 Do not re -inser t the (H)EPA filter into the appliance 
until it has completely dried and then close the 
exhaust filter compar tment.

Cleaning instructions

Always switch off the vacuum cleaner and disconnect 
the power cord from the mains before cleaning the va-
cuum cleaner. The vacuum cleaner and plastic acces-
sories can be cleaned with an ordinar y plastic cleaner.

!

   Do not use abrasive materials, glass- cleaning 

agents or all-purpose cleaning products. Never im -
merse the vacuum cleaner in water.

Subject to technical modifications.