Bosch BGS 6PRO4 - Инструкция по эксплуатации - Страница 46

44

Emptying the dust container

Figure 

18

In order to achieve good vacuuming results, the dust 
container should be emptied after ever y use or, at the 
latest, when dust or dir t has visibly collected on the 
fluff filter or when dust at one point in the container 
has reached the height of the marking.

When emptying the dust container, always check how 
dir ty the fluff filter is and, if necessar y, clean it as de-
tailed in the "Cleaning the fluff filter" instructions. 

Figure

27

Figure 

19

‡

 Fold up the carr ying handle, unlock the dust con-
tainer by folding up the hand grip and take the dust 
container out of the appliance.

Figure 

20

a) 

 Release the filter unit of the dust container by pres-
sing the release button. 

b) 

 Take the filter unit out of the dust container and 
empty the dust container.

Figure 

21

a) 

 Inser t the filter unit into the dust container, making 
sure it is correctly seated.

b) 

 Push the release button back into its original posi-
tion until it clicks into place, in order to ensure that 
the container has been closed properly.

c) 

 When re -inser ting the dust container into the appli-
ance, make sure it is correctly seated.

 Fold back the hand grip to lock the dust container 
in position in the vacuum cleaner.

Filter care

Cleaning the plate filter

Your appliance is equipped with a "Sensor Control" 
Function. 

Figure

22

 + 

Figure

24

 This function constantly 

monitors whether your vacuum cleaner is achieving its 
optimum power level. The indicator light lets you 
know when you need to clean the plate filter, so that 
the vacuum cleaner can reach its optimum power level 
once more.

Vacuum cleaner with “RotationClean” function

Figure 

22

The indicator lights up blue when the appliance is 
working at its optimum level. Once the indicator 
flashes red, the plate filter must be cleaned. The 
appliance is automatically adjusted back to the lowest 
power setting.

* Dependent on model 

Figure 

23*

‡

 Switch the appliance off in order to clean the plate 
filter.

!

 Caution

‡

 The filter can only be cleaned if the appliance is 
switched off.

‡

 To clean the plate filter, turn the knob at least three 
times 18 0 ° clockwise. 

You can also clean the filter if the suction is becoming 
less power ful, even if the indicator has not lit up.
We recommend that you clean the plate filter before 
emptying the dust container. It must be cleaned at the 
latest when the “Sensor Control” indicator lights up:

If the indicator flashes three times in quick successi-
on, even though the plate filter has been cleaned, this 
is probably due to a dir ty fluff filter. In this case, the 
appliance automatically adjusts to the lowest power 
setting and the indicator lights up red permanently.

‡

 Switch the appliance off, empty the dust container 
and clean the fluff filter according to the instruc-
tions in “Cleaning the fluff filter”. 

Fig.

27

Vacuum cleaner with “SelfClean” function  

Figure 

24

The indicator lights up blue when the appliance is 
working at its optimum level. Once the indicator turns 
red and flashes, the appliance switches off automa-
tically 
Filter cleaning is activated and per formed by the 
integrated cleaning motor.

If the appliance cleans three times in quick succes-
sion, this is probably due to a dir ty fluff filter. In this 
case, the appliance automatically adjusts to the 
lowest power setting and the indicator lights up red. 

‡

 Switch the appliance off, empty the dust container 
and clean the fluff filter according to the instruc-
tions in "Cleaning the fluff filter". 

Figure

27

Figure 

25*

If required, you can also activate cleaning manually by 
pressing the “Clean” filter cleaning button.
You can also clean the filter if the suction is becoming 
less power ful, even if the indicator has not lit up. 
We recommend that you clean the plate filter before 
emptying the dust container.