Miele G7970 SCVi - Инструкция по эксплуатации - Страница 36

Settings

36

Water hardness

Your dishwasher is fitted with a water
softener.

- You should programme the dish-

washer to the correct water hardness
for your area.

- Your local water authority will be able

to advise you of the water hardness
level in your area.

- Where the water hardness fluctuates

e.g. between 1.8 and 2.7 mmol/l (10–
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °dH in this ex-
ample).

If the water hardness in your area is
available in a unit other than °dH, you
can convert the values as follows: 
1 °dH = 0.18 mmol/l = 1.78 °fH

Setting the water hardness level



Select the water hardness level in
your area and confirm using 

OK

.

AutoDos (automatic dispens-
ing)

Automatic dispensing automatically ad-
justs the amount of detergent to the se-
lected programme. In the 

Auto 45–

65 °C

 programme, the quantity is adjus-

ted depending on the degree of soiling
of the crockery.

If you want to extend the service life of
the PowerDisk, you can reduce the dis-
pensing quantity. The programme’s
cleaning performance may decrease as
a result. 
If you want to improve the cleaning per-
formance, you can increase the dis-
pensing quantity. This reduces the ser-
vice life of the PowerDisk.

Dosage amount settings

For best results, you can adjust the dis-
pensing quantity of the PowerDisk.



Select the 

Dosage amount

 menu op-

tion and confirm with 

OK

.



Select the setting you want and con-
firm with 

OK

.