Miele G7970 SCVi - Инструкция по эксплуатации - Страница 27

Before using for the first time

27

Setting the time of day

The time of day is updated automatic-
ally if a connection is established with
the WiFi network.

The display will then change to the
screen for setting the clock format and
the time of day.

The current time of day must be set be-
fore you can use the timer option.



Select the setting you want for the
clock format.



Set the hours and the minutes and
confirm by pressing 

OK

.

Setting the water hardness level

The display will change to the screen
for setting the water hardness.

- You should programme the dish-

washer to the correct water hardness
for your area.

- Your local water authority will be able

to advise you of the water hardness
level in your area.

- Where the water hardness fluctuates

e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °dH in this ex-
ample).

In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.

Therefore, please enter the water hard-
ness:

____________°dH or mmol/l

The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).



Set the water hardness level in your
area and confirm using 

OK

.

See the “Settings” chapter, “Water
hardness” section for more informa-
tion.