Miele G7970 SCVi - Инструкция по эксплуатации - Страница 10

Warning and safety instructions

10

 

There must be no electrical sockets behind the dishwasher be-

cause the building-in niche may be too small. Danger of overheating
and fire risk if the dishwasher were to be pushed up against a plug.

 

The dishwasher must not be installed underneath a hob. The high

temperatures radiated by hobs could damage the dishwasher below.
For the same reason, the appliance must not be installed next to
open fires or other appliances that give off heat, such as heaters
etc., not normally found in a kitchen.

 

Ensure that the connection data on the dishwasher’s data plate

(fuse rating, frequency and voltage) match the mains electricity sup-
ply. This data must correspond in order to avoid the risk of damage
to the dishwasher. Compare these before connecting the appliance
to the mains. If in any doubt, consult a qualified electrician.

 

Do not connect the dishwasher to the mains supply until it has

been fully installed and any adjustment has been made to the door
springs.

 

The dishwasher may only be operated if the door opening mech-

anism is working correctly. Otherwise there could be a risk of danger
whilst the automatic door opening mechanism (depending on the
model) is active.
To check that the door opening mechanism is working correctly:

- The door springs must be evenly adjusted on both sides. They are

correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the
door cannot fall open.

- The door locking pins automatically retract when the door opens

at the end of the drying phase.

 

Multi-socket adapters and extension leads do not guarantee the

required safety of the appliance (fire hazard). Do not connect the
dishwasher to the mains electricity supply using a multi-socket ad-
apter or an extension lead.