Kuppersbusch IGS 6908.0 GE - Инструкция по эксплуатации - Страница 19

User instructions 

17 

If it is necessary to open dishwasher door during the washing cycle, 
there will be a 1-minute delay before the program can be resumed. 
After correctly closing the door, press the START/PAUSE  button (4) 
again. This operation may negatively affective the progress of the 
washing cycle. 

END PROGRAM 

The end of the program is indicated by a short signal acoustic and from 
the 

“End”

 visual notification on 

3-FIGURE DISPLAY (12)

. By pressing 

the 

PROGRAM SELECTION 

button

 (2)

 the 

“End”

 visual signal will 

vanish from the display and the dishwasher is ready to continue a new 
cycle 

TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT 

•

Always try to run the dishwasher fully loaded. 

•

Do not wash the dishes in running water. 

•

Use the washing program that is most appropriate for each type of 
load. 

•

Do not carry out any preliminary rinsing. 

•

If available, connect the dishwasher to a hot water supply up to 
60°C. 

 
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT 
THE ENVIRONMENT 

The phosphates contained in dishwasher detergents are harmful to the 
environment. To avoid using excessive amounts of detergent and to 
save on electricity, observe the following: 

•

separate  the more delicate items from dishes that are more 
resistant to aggressive detergents and high temperatures; 

•

do not pour  the detergent directly on the dishes. 

REMOVING THE DISHES 

At the end of the washing program, wait at least 

20 minutes 

before 

removing the dishes, to allow them to cool down. To prevent any water 
droplets on the upper basket from falling on the dishes in the lower 
basket, it is 

advisable 

to unload the lower basket first, and then the 

upper basket.