Kuppersbusch IGS 6908.0 GE - Инструкция по эксплуатации - Страница 17

User instructions 

15 

DELAYING THE PROGRAM 

(available in all programs except the soak program) 

The 

PROGRAM DELAY 

button

 (6)

 can be pressed to delay the start of 

the washing program by up to 

12 or 24 hours depending on the model.

This means that the dishwasher can be operated at the time of day of 
your choice. 
 
Press the 

PROGRAM DELAY 

button

 (6)

 again; the 

3-FIGURE

DISPLAY 

(12)

 will show the number of hours of delay with which the appliance will 

start. 
 
After setting the delay, start the program: press the 

START/PAUSE 

button

 (4)

 for a few seconds, until the 

PROGRAM STARTED 

light

 (5)

starts flashing. 
The appliance will prewash the dishes, after which the “program delay” 
set previously will come into effect. 
 
To cancel the program delay once the wash has started, proceed as 
follows: 

•

 Press 

the 

START/PAUSE 

button

 (4)

 for a few seconds, until the 

PROGRAM STARTED 

light

 (5)

 stops flashing; 

•

 Press 

the 

PROGRAM DELAY 

button

 (6)

 several times until the 

     program delay returns to zero; 

•

 Press 

the 

START/PAUSE 

button

 (4)

 to start the program. 

NOTA:

 It is not possible to select the “delay program” when the program 

have already began. 

"3/1" OPTION BUTTON 

(available in all programs except the soak program) 

By pressing the button 

(8)

 you activate the "

3/1

" option, confirmed when 

the relative light comes on. This option has been studied for the use of  
dishwashing powder or tablets with integrated substances in place of  
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple 
action” products; in this case the dishwasher will use the product in an 
optimal way avoiding salt and rinse-aid consumption, which could 
already be found in the dishwasher. 

Note:

  When selecting the "

3/1

" button, it is normal that the salt and 

rinse-aid lights remain on, if their containers are empty. 

IMPORTANT:

 when no longer required, the option must be 

disabled 

by 

pressing the relative

 button

 (the light goes out).