Kuppersbusch IGS 6908.0 GE - Инструкция по эксплуатации - Страница 18

User instructions 

16

If the water hardness has been set on a value above H3, and the 3/1 
option is activated, the “3/1” OPTION 

LIGHT

 (9) flashes, warning of a 

setting error, because these products are not suitable for use with very 
hard water. This does not prevent the use of the option, but the washing 
results might not be of the best.

AUTOMATIC OPENING DOOR OPTION

At the end of the drying cycle, a special device 

automatically releases 

the door

, which opens slowly and smoothly by a few centimetres. This 

ensures 

perfect drying

 and greater control of rinsing temperatures. 

Once the door has opened, the dishwasher emits a short beep. The 
option is 

activated

 by pressing key 

(10)

 and the relative light

 (11) 

illuminates

 to indicate its activation.

When the function is activated, 

opening of the door must not be 

impeded in any way

; do not leave anything in the space in front of the 

door necessary to allow it to open. 

Do not re-close the door during automatic opening

 as this would 

damage the mechanism. Wait for the pushers to retract before re-closing 
the door. 

START THE DISHWASHER 

After carrying out all the operations described above correctly, to start 
the dishwasher simply press the 

START/PAUSE 

button

 (4)

 for a few 

seconds until a beep sounds (the 

PROGRAM STARTED 

light

 (5)

 starts 

to flash). The 

3-FIGURE DISPLAY (12)

 will show the duration of the 

program in minutes. The duration time is only approximate, because it 
depends on the washing conditions (quantity of dishes, water 
temperature, etc.), and is also continually updated as the washing 
program progress. 

The  3-FIGURE DISPLAY (12) shows the estimated duration of the 
washing program.