Kuppersberg GS 6005 - Инструкция по эксплуатации - Страница 7

7

ENGLISH

TECHNICAL PASSPORT

Dishwasher

Dishwasher Features

Front View

1 Upper Basket
2 Spray Arms
3 Lower Basket
4 Water Softener
5 Cutlery Basket
6 Detergent Dispenser
7 Rinse Aid Dispenser
8 Fork Shelf

4.  P R I O R  U S I N G 

F O R  T H E  F I R S T  T I M E

Before using your dishwasher 

for the fi rst time:

A.  Set the water softener
B.  Pour 500ml of water inside 

the  salt  container  and  then  fi ll  with 

dishwasher salt

C.  Fill the rinse aid dispenser
D.  Function of detergent

А. Water Softener

The water softener is designed to 

remove minerals and salts from the 

water, which would have a detrimental 

or adverse effect on the operation of 

the appliance. The higher the content 

of these minerals and salts, the harder 

the water is. The softener should be 

adjusted according to the hardness 

of the water in your area. Your local 

Water Authority can advise you on the 

hardness of the water in your area.

Setting

The amount of salt dispensed can be 

set from HO to H7.

Salt is not required at the set value 

HO.

1.  Find out about the hardness value 

of your tap water. Your water utility 

company will help you with this.

2.  Set value can be found in the water 

hardness table.

3.  Close the door.

4.  Switch on «Power» switch.

5.  Hold down « Delay» button and 

then press «Program» button for 

5 seconds.The buzzer rings one 

time and H. . fl ashes on the digital 

display.(factory setting is H4)

To change the setting:

6.  Press « Delay « button. Each time 

the button is pressed, the set value 

increasesby one level;when the 

value of H7 has been reached, the 

display jumps back to HO(off).

7.  Press « Program « button. The 

chosen setting has now been 

stored. . 

Contact your local water board for 

information on the hardness of your 

water supply.