Kuppersberg GS 6005 - Инструкция по эксплуатации - Страница 13

13

ENGLISH

TECHNICAL PASSPORT

Dishwasher

differences are possible. Please observe 

the manufacturer’s recommendations 

on the detergent packaging. 

Detergents

There are 3 sorts of detergents

1.  With phosphate and with chlorine

2.  With phosphate and without 

chlorine

3.  Without phosphate and without 

chloride.

Normally new pulverized detergent 

is without phosphate. The water 

softener function of phosphate is not 

given. In this case we recommend to 

fi ll salt in the salt container even when 

the hardness of water is only 6 dH. If 

detergents without phosphate were 

used in case of hard water often white 

spots appear at dishes and glasses. In 

this case please add more detergent to 

reach better results. Detergents without 

chlorine do only bleach a little. Strong 

and coloured spots will not removed 

completely. In this case please choose 

a programme with higher temperature.

Use of «3 in 1» Detergent 

Tablets 
General Advice

1.  Before using these products 

you should fi rst check that the 

water hard-ness in your supply is 

compatible with the use of these 

products as per the detergent 

manufacturers instructions (on the 

product packaging).

2.  These products should be strictly 

used according to the detergent 

manufacturers instructions.

3.  If you encounter problems when 

using «3 in 1» products for the 

fi rst time then please contact the 

detergent manufacturers care line 

(the telephone number is given on 

the product packaging).

These products are detergents with 

integrated and combined detergent/

rinse aid and salt functions. Before 

using  these  products  you  should  fi rst 

check that the water hardness in your 

supply is compatible with the use of 

these products as per the detergent 

manufacturers (on the product 

packaging).

Special Advice

When using combination products, 

the rinse-aid and salt lights are no 

longer useful. It may be helpful to select 

the lowest possible setting for water 

hardness.

To select «3

in

1» function:

1.  Press the power switch and select 

the 3 in 1 washing cycle by pressing 

the option button « Alt» until the 

«3 in 1» indicator blinks.

2.  The 3 in 1 washing cycle will be 

available after pressing the start/

pause button , and the «3 in 1» 

indicator lights.

To cancel «3

in

1» function:

To cancel 3in1 washing cycle by 

pressing the function alternative button 

or follow the «change the programme» 

instructions.

If you decide to switch to the use of 

a standard detergent system we advise 

that you: