Electrolux EKK 61500 OW - Инструкция по эксплуатации - Страница 4

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a
fire blanket.

• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they
can get hot.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the side
walls. Install the shelf supports in the opposite se-
quence.

• Remove any spillage from the lid before opening. Let

the hob surface cool down before closing the lid.

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.

2. 

  SAFETY INSTRUCTIONS

This appliance is suitable for the following
markets:   IL  RU

2.1 

Installation

WARNING!

Only a qualified person must in-
stall this appliance.

• Remove all the packaging.
• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always
wear safety gloves.

• Do not pull the appliance by the handle.
• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is installed

below and adjacent safe structures.

• The sides of the appliance must stay

adjacent to appliances or to units with
the same height.

• Do not install the appliance on a plat-

form.

• Do not install the appliance adjacent to

a door or under a window. This pre-
vents hot cookware to fall from the ap-
pliance when the door or the window is
opened.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.
• Make sure that the electrical information

on the rating plate agrees with the pow-
er supply. If not, contact an electrician.

4

www.electrolux.com