Ryobi R18MMS-0 (5133004515) - Инструкция по эксплуатации - Страница 6

4

| English

leaking. Check with the forwarding company for further 
advice.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise and the operator 
should pay special attention to avoid the following:

■

Injury caused by kickback

–

Read and understand the information in this manual.

■

Injury caused by dust

–

Dust may enter the eyes or respiratory system. 
Wear eye protection at all times. Wear appropriate 
dust control mask with filters suitable for protecting 
against particles from the material being cut. Do 
not eat, drink, or smoke in the work area. Ensure 
adequate ventilation.

■

Injury caused by electric shock 

–

The blade may contact hidden wiring, causing 
parts of the product to become live. Always hold 
the product by the designated handles and take 
care when blind-cutting into walls and floors where 
cables may be hidden.

■

Injury caused by contact with the blade

–

The blades are very sharp and will become hot 
during use. Wear gloves when changing blades. 
Keep hands away from the cutting area at all times. 
Never hold workpiece being cut in your hands or 
across your leg. Clamp the workpiece whenever 
possible.

■

Injury caused by vibration

–

Limit exposure. See Risk Reduction.

RISK REDUCTION

It has been reported that vibrations from handheld tools 
may contribute to a condition called Raynaud’s Syndrome 
in certain individuals. Symptoms may include tingling, 
numbness and blanching of the 

fi

 ngers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 
cold and dampness, diet, smoking and work practices 
are all thought to contribute to the development of these 
symptoms. There are measures that can be taken by the 
operator to possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. When operating 
the unit wear gloves to keep the hands and wrists 
warm. It is reported that cold weather is a major factor 
contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to increase 
blood circulation.

■

Take frequent work breaks. Limit the amount of 
exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your doctor about 
these symptoms.

 WARNING

Injuries may be caused or aggravated by prolonged use 
of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 149.

1.  Dust pipe joint
2.  Front handle, insulated gripping surface
3. Lock-off button
4. Switch trigger
5.  Handle, insulated gripping surface
6. Hex key
7. Battery port
8.  Edge guide knob
9.  Depth adjustment lock knob
10. Spindle lock button
11. Edge guide fence
12. Tile blade
13. Multi purpose blade
14. Inner flange
15. Outer flange
16. Blade Screw

MAINTENANCE

 WARNING

The product should never be connected to a power 
supply when assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product from the power 
supply will prevent accidental starting that could cause 
serious injury.

 WARNING

When servicing, use only original manufacturer’s 
replacement parts, accessories and attachments. Use of 
any other parts may create a hazard or cause product 
damage.

■

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

 WARNING

Do not at any time let brake 

fl

 uids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact 
with plastic parts. Chemicals can damage, weaken or 
destroy plastic which may result in serious personal 
injury.

 WARNING

For greater safety and reliability, all repairs should be 
performed by an authorised service centre.