Ryobi R18MMS-0 (5133004515) - Инструкция по эксплуатации - Страница 3

1

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

Safety, performance, and dependability have been given 
top priority in the design of your multi material saw.

INTENDED USE

The multi material saw is intended to be used only by 
adults who have read and understood the instructions 
and warnings in this manual, and can be considered 
responsible for their actions.
The product is designed for rip- and cross-cutting of wood. 
The product is to be used with the base of the product in 
contact with the workpiece. It should only be used in a dry, 
well-lit and well ventilated area.
When 

fi

 tted with the appropriate saw blades, the product 

can be used to cut thin-walled non-ferrous metals or 
plastics.
When 

fi

 tted with the appropriate diamond cutting discs, the 

product can be used to cut tiles without the use of water.

The product must not be used to cut ferrous metals.

The product is designed for handheld use. The product 
is not to be mounted onto a workbench unless speci

fi

 c 

instructions about how to do this are given by the 
manufacturer of the saw.
Do not use the product for any other purpose. Use of the 
product for operations different from intended could result 
in a hazardous situation.

 WARNING

Read all safety warnings, instructions, illustrations 
and specifications provided with this power tool.

Failure to follow all instructions listed below may result in 
electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

MULTI MATERIAL SAW SAFETY WARNINGS

CUTTING PROCEDURES

 DANGER

Keep hands away from cutting area and the blade. 
Keep your second hand on auxiliary handle, or 
motor housing.

 If both hands are holding the saw, they 

cannot be cut by the blade.

■

Do not reach underneath the workpiece. 

The guard 

cannot protect you from the blade below the workpiece.

■

Adjust the cutting depth to the thickness of the 
workpiece. 

Less than a full tooth of the blade teeth 

should be visible below the workpiece.

■

Never hold the workpiece in your hands or across 
your leg while cutting. Secure the workpiece to a 
stable platform. 

It is important to support the work 

properly to minimise body exposure, blade binding, or 
loss of control.

■

Hold the power tool by insulated gripping surfaces, 
when performing an operation where the cutting 
tool may contact hidden wiring.

 Contact with a “live” 

wire will also make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.

■

When ripping, always use a rip fence or straight 
edge guide.

 This improves the accuracy of cut and 

reduces the chance of blade binding.

■

Always use blades with correct size and shape 
(diamond versus round) of arbour holes. 

Blades that 

do not match the mounting hardware of the saw will run 
eccentrically, causing loss of control.

■

Never use damaged or incorrect blade washers 
or bolt. 

The blade washers and bolt were specially 

designed for your saw, for optimum performance and 
safety of operation.

KICKBACK CAUSES AND RELATED WARNINGS:

■

kickback is a sudden reaction to a pinched, jammed or 
misaligned saw blade, causing an uncontrolled saw to 
lift up and out of the workpiece toward the operator;

■

when the blade is pinched or jammed tightly by the kerf 
closing down, the blade stalls and the motor reaction 
drives the unit rapidly back toward the operator;

■

if the blade becomes twisted or misaligned in the cut, 
the teeth at the back edge of the blade can dig into the 
top surface of the wood causing the blade to climb out 
of the kerf and jump back toward the operator.

Kickback is the result of saw misuse and/or incorrect 
operating procedures or conditions and can be avoided by 
taking proper precautions as given below.

■

Maintain a firm grip with both hands on the saw 
and position your arms to resist kickback forces. 
Position your body to either side of the blade, but not 
in line with the blade. 

Kickback could cause the saw to 

jump backwards, but kickback forces can be controlled 
by the operator, if proper precautions are taken.

■

When blade is binding, or when interrupting a cut 
for any reason, release the trigger and hold the saw 
motionless in the material until the blade comes 
to a complete stop. Never attempt to remove the 
saw from the work or pull the saw backward while 
the blade is in motion or kickback may occur.

Investigate and take corrective actions to eliminate the 
cause of blade binding.

■

When restarting a saw in the workpiece, centre the 
saw blade in the kerf so that the saw teeth are not 
engaged into the material.

 If a saw blade binds, it may 

walk up or kickback from the workpiece as the saw is 
restarted.

■

Support large panels to minimise the risk of blade 
pinching and kickback.

 Large panels tend to sag 

under their own weight. Supports must be placed under 
the panel on both sides, near the line of cut and near 
the edge of the panel.

■

Do not use dull or damaged blades.

 Unsharpened 

or improperly set blades produce narrow kerf causing 
excessive friction, blade binding and kickback.

■

Blade depth and bevel adjusting locking levers 
must be tight and secure before making cut.

 If blade 

adjustment shifts while cutting, it may cause binding 
and kickback.

■

Use extra caution when sawing into existing walls 
or other blind areas.

 The protruding blade may cut 

objects that can cause kickback.