Makita HS6601 - Инструкция по эксплуатации - Страница 3

3 ENGLISH

General power tool safety warnings

WARNING:

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Work area safety

1.

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents.

2.

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

3.

Keep children and bystanders away while 

operating a power tool.

 Distractions can cause

you to lose control.

Electrical Safety

1.

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

2.

Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3.

Do not expose power tools to rain or wet con-

ditions.

 Water entering a power tool will increase

the risk of electric shock.

4.

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

5.

When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use.

 Use of a cord suit-

able for outdoor use reduces the risk of electric shock.

6.

If operating a power tool in a damp location 

is unavoidable, use a residual current device 

(RCD) protected supply.

 Use of an RCD reduces 

the risk of electric shock.

7.

Use of power supply via an RCD with a rated 

residual current of 30 mA or less is always 

recommended.

Personal Safety

1.

Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or med

-

ication.

 A moment of inattention while operating

power tools may result in serious personal injury.

2.

Use personal protective equipment. Always 

wear eye protection.

 Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or 

hearing protection used for appropriate conditions 

will reduce personal injuries.

3.

Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting 

to power source and/or battery pack, picking 

up or carrying the tool.

 Carrying power tools with

your finger on the switch or energising power tools 

that have the switch on invites accidents.

4.

Remove any adjusting key or wrench before 

turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury.

5.

Do not overreach. Keep proper footing and 

balance at all times.

 This enables better control

of the power tool in unexpected situations.

6.

Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing, and gloves

away from moving parts.

 Loose clothes, jewel

-

lery or long hair can be caught in moving parts.

7.

If devices are provided for the connection of 

dust extraction and collection facilities, ensure

these are connected and properly used.

 Use of

dust collection can reduce dust-related hazards.

Power tool use and care

1.

Do not force the power tool. Use the correct 

power tool for your application.

 The correct

power tool will do the job better and safer at the 

rate for which it was designed.

2.

Do not use the power tool if the switch does 

not turn it on and off.

 Any power tool that cannot 

be controlled with the switch is dangerous and 

must be repaired.

3.

Disconnect the plug from the power source 

and/or the battery pack from the power tool 

before making any adjustments, changing 

accessories, or storing power tools.

 Such pre-

ventive safety measures reduce the risk of starting

the power tool accidentally.

4.

Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with 

the power tool or these instructions to operate

the power tool.

 Power tools are dangerous in the

hands of untrained users.

5.

Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 

and any other condition that may affect the 

power tool’s operation. If damaged, have the 

power tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools.

6.

Keep cutting tools sharp and clean.

 Properly

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

7.

Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different

from those intended could result in a hazardous situation.

Service

1.

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power

tool is maintained.

2.

Follow instruction for lubricating and chang-

ing accessories.

3.

Keep handles dry, clean and free from oil and 

grease.