Fieldmann FDUK 50301 - Инструкция по эксплуатации - Страница 17

EN

CORDLESS CIRCULAR SAW

OPERATING INSTRUCTIONS

17

Safety instructions

17

OPERATING INSTRUCTIONS

ELECTRICAL CIRCULAR SAW

EN

Safety instructions

5. SAFETY INSTRUCTIONS

Before use, please read these safety instructions and keep them in a safe place.

ATTENTION! 

 This symbol indicates risk of injury or damage to the equipment.

ATTENTION! 

 Upon failure to follow the instructions specified in this manual, there is a risk

of injury. 

ATTENTION! 

 Electric circular saw conforms to applicable technical regulations and

standards.

ATTENTION! 

 Before putting the circular saw aside, make sure all moving parts have

stopped.

Special Safety Instructions for Operation of the Circular Saw

ATTENTION! 

 Risk of Injury! Turn off the saw and unplug the plug from the outlet before

attempting to install or remove the circular-saw blade. This way you prevent the circular saw 
from being accidentally started.

The root of the circular-saw blade should always be in tight contact with the cut material.
Keep your hands away from the circular-saw blade.
Never touch the bottom of the material during cutting.
Make sure the circular-saw blade is sharp, undamaged and correctly adjusted. Otherwise, the
cutting edge could break and cause damage to the circular saw or operator’s injury.
Do not touch the circular-saw blade immediately after cutting. It could be hot.
Remove the adjustment key from the saw before starting the work.
Some machined materials may contain preservative substances which could be toxic. Avoid
inhaling saw-dust while machining such materials.
When cutting thin materials, make sure that the cut-off parts do not get into the retractable
guard of the saw.

ATTENTION! 

 Wear dust mask and protective goggles while performing dusty work. Wear

protective goggles conforming to DIN 58214 standard. If the circular saw is used without eye 
protection, foreign particles could get lodged in your eyes (such as cuttings or matchwood). 
This could permanently damage your eyesight. Using protective goggles that do not conform 
to DIN standard could result in serious injury for the reasons of possible shattering of the 
protective glass. 

ATTENTION! 

 Choose appropriate circular-saw blade for the work you intend to do. Use this

circular saw only for cutting wood, wooden materials and soft metals such as aluminium. 
Other materials could tear, rip or spring up, get hitched on the circular-saw blade or cause 
other danger.