Fieldmann FDUK 50301 - Инструкция по эксплуатации - Страница 11

EN

CORDLESS CIRCULAR SAW

OPERATING INSTRUCTIONS

11

General safety instructions

11

OPERATING INSTRUCTIONS

ELECTRICAL CIRCULAR SAW

EN

General safety instructions

2. GENERAL SAFETY INSTRUCTIONS

Carefully read, remember and keep these safety instructions

WARNING! 

In the use of electric machines and power tools, it is necessary to respect

and follow the following safety instructions for the reasons of protection against electric 
shock, personal injury and danger of fire. The term “power tool” in the instructions below 
refers both to mains-operated (corded) power tool or battery-operated (cordless) power tool. 
Save all warnings and instructions for future reference.

Workplace

Keep the work area clean and well lit. Cluttered or dark areas in the workplace invite
accidents. Store power tools that you don’t currently use.
Do not operate power tools in environments with danger of occurrence of a fire or explosion,
such as in the presence of flammable liquids, gases, or dust. Power tools create sparks 
which may ignite the dust or fumes.
Keep unauthorised persons, especially children, away from the work area while operating
a power tool! Distractions can cause you to lose control over the performed activity. In no 
event leave your power tool unattended. Keep the equipment away from animals.

Electrical Safety

Power tool plugs must match the mains socket outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Undamaged plugs and 
matching outlets will reduce risk of electric shock. Damaged or fouled supply cables increase 
the risk of electric shock. If the power cord is damaged, it must be replaced by a new power 
cord which is available at the authorised service centre or the importer.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cooking
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or 
grounded.
Do not expose power tools to rain or wet conditions. Never touch the power tool with wet
hands. Never wash the power tool under running water or immerse it in water.
Never use the supply cable for other than intended purposes. Never use the cord for carrying
or pulling the power tool. Never unplug the plug from the outlet by pulling the cable. Keep 
electric cables away from sharp or hot objects to prevent mechanical damage.
The power tool was designed to be powered solely by alternating electric current. Always
check if the electric voltage matches the information specified in the type label of the power 
tool.
Never use power tool with damaged electric cable or plug or which has been dropped or is in
any way damaged.