Stanley STHR272KS - Инструкция по эксплуатации - Страница 4

ENGLISH

4

(Original instructions)

g.  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4.  Power tool use and care

a.  Do not force the power tool. Use the correct power 

tool for your application.

 The correct power tool will do 

the job better and safer at the rate for which it was 

designed.

b.  Do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c.  Disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing 

power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

d.  Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 

users.

e.  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tools 

operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

g.  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations 

different from those intended could result in a hazardous 

situation.

5.  Service

a.  Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is 

maintained.

Hammer safety warnings

•  Wear ear protectors.

 Exposure to noise can cause 

hearing loss.

•  Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

•  Hold power tool by insulated gripping surfaces, 

when performing an operation where the cutting 
accessory may contact hidden wiring or its own 
cord.

 Cutting accessory contacting a "live" wire may 

make exposed metal parts of the power tool "live" and 
could give the operator an electric shock.

•  Never use a chisel accessory in rotary mode. The 

acces-sory will bind in the material and rotate the drill.

•  Use clamps or another practical way to secure and 

support the workpiece to a stable platform. Holding the 
work by hand or against your body leaves it unstable and 
may lead to loss of control.

•  Before drilling into walls, floors or ceilings, check for the 

location of wiring and pipes.

•  Avoid touching the tip of a drill bit just after drilling, as it 

may be hot.

•  The intended use is described in this instruction manual. 

The use of any accessory or attachment or performance 
of any operation with this tool other than those 
recom-mended in this instruction manual may present a 
risk of personal injury and/or damage to property.

Safety of others

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible 
for their safety.

•  Children should be supervised to ensure that they do not 

play with the appliance.