Seagate (ST12000NE0008) - Инструкция по эксплуатации - Страница 7

Seagate IronWolf Pro SATA Product Manual, Rev. G

6 

www.seagate.com

Introduction

1.1

About the Serial ATA interface

The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary 
advantages include:



Easy installation and configuration with true plug-and-play connectivity.

It is not necessary to set any jumpers or other configuration options.



Thinner and more flexible cabling for improved enclosure airflow and ease of installation.



Scalability to higher performance levels.

In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA 
was designed to allow users to install a Serial ATA host adapter and Serial ATA disk drive in the current system and 
expect all of the existing applications to work as normal.

The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter. 
There is no master/slave relationship with Serial ATA devices like there is with parallel ATA. If two drives are attached 
on one Serial ATA host adapter, the host operating system views the two devices as if they were both “masters” on two 
separate ports. This essentially means both drives behave as if they are Device 0 (master) devices.

NOTE

The host adapter may, optionally, emulate a master/slave environment to host software 
where two devices on separate Serial ATA ports are represented to host software as a 
Device 0 (master) and Device 1 (slave) accessed at the same set of host bus addresses. A 
host adapter that emulates a master/slave environment manages two sets of shadow 
registers. This is not a typical Serial ATA environment.

The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide 
backward compatibility with existing host systems and software. The Command and Control Block registers, PIO and 
DMA data transfers, resets, and interrupts are all emulated.

The Serial ATA host adapter contains a set of registers that shadow the contents of the traditional device registers, 
referred to as the Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional 
information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized AT Attachment” 
specification. The specification can be downloaded from 

www.serialata.org

.