Seagate (ST12000NE0008) - Инструкция по эксплуатации - Страница 16

Seagate IronWolf Pro SATA Product Manual, Rev. G

15 

www.seagate.com

Drive specifications

2.6.2

Humidity

The values below assume that no condensation on the drive occurs. Maximum wet bulb temperature is 84.2°F (29°C).

2.6.2.1

Relative humidity

2.6.3

Effective Altitude (sea level)

2.6.4

Shock and Vibration

Shock and vibration measurements specified in this document are made directly on the drive itself and applied in the X, Y, and Z axis at the drive

mounting point locations.

2.6.4.1

Shock

a. Operating

The drive will operate without error while subjected to intermittent shock pulses not exceeding 50 Gs at a maximum duration of 
2ms.

b. Non-operating

The drive will operate without non-recoverable errors after being subjected to shock pulses not exceeding 200g at a maximum

duration of 2ms.

2.6.4.2

Vibration

a. Linear Random Operating Vibration

The drive will operate without non-recoverable errors while being subjected to the random power spectral density noise

specified below.

b. Random Rotary Operating Vibration

The drive will exhibit greater than 90% throughput for sequential and random write operations while subjected to the shaped

random power spectral density noise specified below.

c. Linear Random Non-Operating Vibration

The drive will not incur physical damage or have non-recoverable errors after being subjected to the power spectral density 
noise specified below.

Operating:

5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.

Nonoperating:

5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.

Operating:

–304.8 m to 3048 m (–1000 ft. to 10,000+ ft.)

Nonoperating:

–304.8 m to 12,192 m (–1000 ft. to 40,000+ ft.)