Bort Compact - Инструкция по эксплуатации - Страница 17

17

1 .  BORT GLOBAL LIMITED offers the 2-year warranty from the date 

of sale for all its products . Professional and commercial tools are not 

covered by the warranty . Repair is only available for a fee in this case .

2 .  Non-commercial use of the tools imposes limitations on the 

duration of its operation and restricts the intended usage to house-

hold purposes only . The continuous operating time should not ex-

ceed 40 hours . In addition, 10-15 minute breaks are to be made after 

every 15 minutes of continuous operation . Ignoring this condition 

when using the tools is a violation of the good operating practice 

(this provision does not apply to pumps, generators, chargers and 

similar equipment) . Subject to the above mentioned condition, the 

service life of the tools is 5 years .

When you purchase a tool, a warranty card is issued (fields with a 

date of sale, model, and serial number are mandatory, other fields 

can also be completed) . Please keep the card together with the 

sales receipt during the entire warranty period for presentation at 

the service centre .

Electric tools are only accepted for warranty repairs when assem-

bled with all removable devices and their fastening elements (bus 

bars, saw blades, chains, knives, trimmer heads, injectors, sprockets, 

bolts, nuts, and mounting flanges) in working condition .

3 .  The following malfunctions are eliminated free of charge during 

the warranty period:

Damage to the instrument, caused by the use of low-quality ma-

terials

Assembly defects due to the fault of the manufacturer .

4 .  The warranty does not cover:

Malfunctions of the tools caused by the failure to comply with the 

operating instructions .

Mechanical damage (cracks, chips, mechanical damage to power 

cords, mechanical damage to the enclosure, etc .), damage 

caused by exposure to aggressive environments and high tem-

peratures, damage induced by the ingress of liquids or foreign 

matter into ventilation grids of the electric tools, as well as dam-

age due to improper storage (corrosion of metal parts, etc .) .

Tools with defects which were caused by an overload (simultane-

ous failure of the rotor and stator), improper use (usage of blunt, 

unsuitable, unbalanced, or improperly chosen replacement 

devices), lack of maintenance or care, and use of the tools for 

purposes other than the intended purpose (for example, for 

processing of materials for which the tool is not intended, etc .), 

as well as by the instability of electric power supply, exceeding 

the standards set by EN  61000-3-2, EN  61000-3-3 . Among oth-

ers, undeniable signs of an overload include: changes in appear-

ance, deformation or melting of parts and components of the 

product, darkening or charring of wire insulation under high 

temperatures .

Wear parts and materials (carbon brushes, belts, rubber gaskets, 

seals, guards, platforms, bus bars, gears, bearings, hubs, coil 

heaters, pulleys, rollers, rods, lock buttons, etc .), components 

(gears, shafts, bearings, rods, rollers, etc .) subject to deteriora-

tion due to lubrication wear-out, as well as replacement devices 

GB

(drill chucks, SDS cartridges, platforms, collets, bus bars, flexible 

shafts, batteries, battery chargers, etc .) and supplies (knives, 

saws, abrasives, saw blades, drill bits, drills, lubrication, etc .), 

except in cases of mechanical damage of the above mentioned 

products due to failures of the electric tool which are covered 

by this warranty .

Natural wear of the tool, its parts and components (wearing out of 

the resource, severe internal or external contamination, wearing 

out of the lubrication) .

Tools that were unsealed or repaired during the warranty period 

by persons or organizations who are not legally authorized to 

perform these activities .

Tools with removed, erased, worn out or changed serial numbers, 

including cases when the data of the electric tool does not 

match the data of the warranty card .

Preventive maintenance of the electric tools, for example, cleaning, 

washing, lubrication .

5 .  Do not operate electric tools exhibiting failure symptoms (high 

arcing, smell of burning, increased noise, severe vibration, uneven 

rotation, loss of power) . Do not use the electric tools if there is any 

mechanical damage to the power cord (cracks, chips, tears, binds), 

AC plug, or the enclosure of the tool .

6 .  During the warranty period, faulty parts and components of the 

instrument are repaired or replaced free of charge . The Service Cen-

tre reserves the right to decide whether such parts and components 

are to be replaced or repaired .

If a failure or malfunction is recognized by BORT GLOBAL LIMITED 

as a warranty case, then it can be removed according to our own 

choice by repair or replacement of the defective tool . Replaced 

tools and parts become the property of the Service Centre of BORT 

GLOBAL LIMITED .

7 .  Guidelines for the preventive maintenance of electric tools:

Regular preventive maintenance (cleaning, washing, relubrication 

of bearings and gearbox, replacement of fast wearing parts) is rec-

ommended for the tools . Maintenance ensures perfect operation of 

the electric tool during its entire service life cycle . The frequency of 

preventive maintenance at rated load is determined according to 

the natural wear of carbon brushes . Maintenance work is charged 

according to the price list of the service centre . Any failures covered 

by the warranty and detected in the course of maintenance are 

repaired free of charge . Warranted failures, which are detected by 

the diagnostics, are eliminated as agreed by the parties according 

to the routine procedure .

Preventive maintenance does not extend the duration of the war-

ranty period .

Other claims, except for the above mentioned right for free reme-

dial measures, are not covered by this warranty .

8 .  This warranty does not affect other legal consumer rights grant-

ed by the applicable laws .

* Depending on the model .