Philips AC4550/50 - Инструкция по эксплуатации - Страница 19

English

17

EN

Problem

Possible solution

The appliance 
produces a 
strange smell.

• 

The first few times you use the appliance, it may 
produce a plastic smell. This is normal. However, if the 
appliance produces a burnt smell even if removing 
filters, contact your Philips dealer or an authorized 
Philips service center. The filter may produce smell 
after being used for a while because of the absorption 
of indoor gases. It’s recommended that you reactivate 
the filter by putting it in direct sunlight for repeated 
use. If odor still exists, replace the filter.

The appliance is 
extra loud.

• 

If the appliance is too loud, you can change the fan 
speed to a lower fan speed level. When using the 
appliance in a bedroom at night, choose the silent 
speed.

The appliance 
still indicates that 
I need to replace 
a filter, but I 
already did.

• 

Perhaps you did not reset the filter lifetime counter. 
Switch on the appliance. Then touch and hold the 
reset button ( 

 ) for 3 seconds.

Error code "E1" 
displays on the 
screeen.

• 

The motor has malfunctions. Contact the Consumer 
Care Center in your country.

Error codes "E2", 
"E3", "E4" or "E5" 
displays on the 
screen.

• 

The sensor has malfunctions. Contact the Consumer 
Care Center in your country.