Timberk TEC.E5 M 1000 - Инструкция по эксплуатации - Страница 9

www.timberk.com • electric convector heater

8

11. UTILIZATION

Upon end of its life convector heater should be utilized in accordance with 

rules and regulations and in ways effective in the place of utilization. For 

details concerning utilization of your convector heater, please, contact local 

authorities.

12. CIRCUIT SCHEMATICS

Models  TEC.E3 M, TEC.E5 M

Fig. 8

Possible malfunctions and remedies for them:

If you are not able to remedy a malfunction according to the 

recommendations or other malfunctions occur, contact the authorized 

service center of  Timberk.

9.  TROUBLESHOOTING

Malfunction

Cause

Remedy

1. The heater heats poorly

1. The heating element is faulty

1. Contact the authorized service center 

of Timberk

2. Low voltage in the electric mains

2. Check voltage in the electric mains

2. The heater does not work

1. No voltage in the electric mains

1. Check presence of voltage in the 

electric mains

2. Breakdown of the electric cable

2. Check integrity of the electric cable and 

replace it if necessary

3. The automatic circuit breaker of the 

electric mains is faulty

3. Check operability of the automatic circuit 

breaker of the electric mains and replace 
the faulty circuit breaker if necessary

4. Breakdown in the heating element circuit

4. Contact the authorized service center 

of Timberk

10. TRANSPORTATIOM AND STORAGE

Temperature 
requirements*

Humidity 
requirements*

We are exploring new technologies and we constantly improving the quality 

of our products. That’s why specifications, design and accessories are 

subject to change without any specific notice.

* This product must have storage in dry, well-ventilated space of warehouse at the temperature 
not lower than -30°

Transportation and 
storage

From -30° to +50°

From 15% to 85% 

(without a condensate)