Timberk TCH A1B 2000 - Инструкция по эксплуатации - Страница 8

www.timberk.com • electric ceiling heater

7

1. Before switching the heater, it is necessary to thoroughly wipe the 

surface of the radiating boards first with a soft rag moistened in alcohol 

and then with a dry rag in order to exclude appearance of burnt spots.

2. After switching and reaching the working mode, the appliance starts to 

radiate infrared beams and heat the surrounding objects/bodies.

3. To exclude unpleasant burnt odor, it is recommended to keep the heater 

clean preventing accumulation of dust on it.

Possible malfunctions and remedies for them are given in Table 5.
Table 5

If you are not able to remedy a malfunction according to the 

recommendations or other malfunctions occur, contact the authorized 

service center of  Timberk.

1. During operation, it is necessary to periodically (once a year) check the 

electric cable contacts and terminal connectors for good tightening.

2. If the body becomes dirty, wipe off dust with a towelette. Radiating 

boards should be wiped in cold condition with alcohol.

7. OPERATION

9.  TROUBLESHOOTING

8. MAINTENANCE

NOTE:

Discoloration of paint on the heater body wall directed 

to the ceiling during operation is not a defect. Changing 

of colour for heating plates is not defect.

NOTE:

Radiating boards should be wiped with a soft rag 

moistened in alcohol leaving no scratches on the 

surface. Use of other liquids is prohibited!

WARNING! 

Slight crackles may be heard during operation at the 

moment of heating or cooling, which disappear, when 

the heater reaches the working mode.

Malfunction

Cause

Remedy

1. The heater heats poorly

1. The heating element is faulty

1. Contact the authorized service center 

of Timberk

2. Low voltage in the electric mains

2. Check voltage in the electric mains

2. The heater does not work

1. No voltage in the electric mains

1. Check presence of voltage in the 

electric mains

2. Breakdown of the electric cable

2. Check integrity of the electric cable and 

replace it if necessary

3. The automatic circuit breaker of the 

electric mains is faulty

3. Check operability of the automatic circuit 

breaker of the electric mains and replace 
the faulty circuit breaker if necessary

4. Breakdown in the heating element circuit

4. Contact the authorized service center 

of Timberk