MO-EL Fiore 1200 W Shuko 766N - Инструкция по эксплуатации - Страница 10

10

zone 1 and zone 2; in zone 3 the minimum  above ground  level is 

180 cm, according with the rules of each Country. 

• 

Be  sure  that  the  heater  is  not  facing  the  ceiling  or  inflammable 

substances.

• 

The appliance must not be located neither directly below, nor in 

front of a socket-outlet.

• 

The heater must be installed so as to prevent that the switches can 

be touched from those who are in the shower.

• 

Ensure  that  there  is  no  possibility  of  inflammable  material,  com

-

bustible material or curtains coming into contact with the heater, 

or lie near the heater.

• 

Heaters should not be installed in areas where hazardous vapours 

may be present. Defined in BS5345.

• 

The heaters are fitted with safety guards. These are intended only 

to  stop  large  objects  from  hitting  the  emitters.  On  no  account 

should the heater be operated with the guard removed. 

• 

For consumer use the heaters are fitted with high temperaure sili

-

cone rubber flexible cable (H05 RN-F) conforming to BS 6500.

• 

The models for professional use, that are marked with a “P” in the 

code, do not have the power cord and the switch. For professional 

installation, cabling of the same specification should be selected.

• 

The product is in class I and IP65, wich is the protection rate for 

the units to be used even outdoor. For keeping the protection rate 

of the appliance, the connection of the appliance with the power 

supply must be done by means of a minimum IP65 system, as per 

the standards HD 384 CENELEC for Europe, or international IEC 

60346-7-708 1988.

• 

Before pressing the switch, seize firmly the grip and avoid to touch 

the metal parts.

3.  LOCATION 

The Fiore range of heaters is deliberately designed to be very flexible 

in the choice of position. There are three basic options:

• 

A wall mounting bracket version with a specifically designed 
fitting for wall attachment (768M)

.  Before  drilling  the  holes  for 

the dowels, be sure that the wall is solid and that you are far from 

water tubes or electrical wires. Apply the drilling template on the