Elenberg MC-4080 - Инструкция по эксплуатации - Страница 10

10

System Setup

SPEAKER SETUP:

• DOWNMIX

LT/RT: 

The audio out is Left and Right channels format even if the original

sound is 5.1CH format.

STEREO:

 The audio out format is stereo even if the original sound is

5.1CH format.

DOLBY DIGITAL SETUP:

• Dual mono

Stereo: set audio output to the stereo output
L-mono:set audio output to the mono -left channel
R-mono:set audio output to the mono-right channel
Mix-mono:set audio output to the Mix mono channel

• DYNAMIC

If watching large dynamic scope movie program at night, to select this
mode you can reduce the volume to a very low level, at the same time, to
keep the fine details sounds. In this case, this doesn't disturb the family
and keep the quality sounds.

VIDEO SETUP PAGE:

• COMPONENT V IDE

OFF:

 set video output to the composite

YUV:

 set video output in analog component video format when connecting

to Y/U/V terminals

P-YUV: 

set progressive YUV signals. Connection same as YUV

RGB: 

set video output in Red/Green/Blue format when connecting to

SCART terminals

P-RGB: 

progressive RGB signals. Connection same as RGB

VGA: 

set to this item when connecting to VGA terminals.

• Notes:

If the video setting differs with the physical connection, the TV set
may be without picture. In case of no picture, you can RESET the
machine, then keep pressing key [V_MODE] until the picture is OK
again. For the 2CH player, the [V-MODE]has no function.
The machine without VGA or SCART has no progressive out. The P-
YUV and P-RGB should not be selected.

• QUALITY:

You can set the sharpness brightness, contrast, etc. according to your
preference.