Bosch AutoCook MUC48B68RU - Инструкция по эксплуатации - Страница 18

16 

en

Customised setting options 

In function selection mode, button 

B

 and 

the indicator [ мой режим ] (my mode) are 

permanently lit. Button 

G

 flashes. “00:00” 

is shown in the display.

1� 

Press button 

F

 once.

“00:00” flashes in the display.

2� 

Keep pressing button 

F

 until the desired 

preparation time is displayed.

3� 

Press button 

C

 once.

“0000” flashes in the display.

4� 

Keep pressing button 

C

 until the desired 

preparation temperature is displayed.

5� 

Press button 

G

 to start with the 

selected settings.

The appliance heats up the pan until the 

target temperature is reached.
Once the target temperature is reached, 

the lines go out and the preparation time 

is shown in the display. The preparation 

process starts automatically.

рецепт 1 / рецепт 2 (recipe 1 / 

recipe 2) – saving personal 

preparation programmes

Depending on the model 

X

“Model over-

view and technical data” see page 20

Personal preparation programmes with 

customised time and temperature can 

be saved under the memory locations 

[ рецепт 1 ] (recipe 1) and [ рецепт 2 ] 

(recipe 2).

1� 

In function selection mode, press 

button 

D

 once.

The LED [ рецепт 1 ] (recipe 1) lights up. 

The pre-configured preparation time is 

shown in the display.

Note:

 if you have not previously saved any 

personal preparation programmes, “00:00” 

is shown in the display.

2� 

Press button 

F

 once.

The display flashes. LED 1 (preparation 

step 1) lights up in the control panel.

3� 

Keep pressing button 

F

 until the desired 

preparation time is displayed.

When button 

F

 is briefly pressed, the prepa

-

ration time is increased by 1 minute. When 

button 

F

 is pressed for a longer period, the 

preparation time is increased by 10 minutes. 

The time increases up to the pre-configured 

maximum value and then returns to the 

pre-configured minimum value.

4� 

Press button 

C

 once.

The pre-configured preparation temperature 

is shown in the display.

Note:

 if you have not previously saved any 

personal preparation programmes, “0000” is 

shown in the display.

5� 

Keep pressing button 

C

 until the desired 

preparation temperature is displayed.

6� 

Press and hold button 

G

 (>2 seconds) 

to save the set values.

In order to program other preparation steps, 

repeat points 2 to 6. Up to 3 preparation 

steps can be programmed.
The saved preparation programme 

[ рецепт 1 ] (recipe 1) can be selected as 

usual via function selection mode (see the 

sections on selecting and starting a prepa-

ration programme).

Note:

 to save a second personal prepa-

ration programme under [ рецепт 2 ] 

(recipe 2), use the same process as 

described above for [ рецепт 1 ] (recipe 1).

To delete a personal preparation 

programme, perform the following steps:

1� 

In function selection mode, press 

button 

D

 once.

The LED [ рецепт 1 ] (recipe 1) lights up. 

The saved preparation time is shown in the 

display.

2� 

Press button 

F

 once.

The display flashes. LED 1 (preparation 

step 1) lights up in the control panel.

3� 

Press and hold button 

H

 (>2 seconds).

The settings for [ рецепт 1 ] (recipe 1) are 

deleted.

Note:

 to delete the second personal prepa-

ration programme [ рецепт 2 ] (recipe 2), 

use the same process as described above 

for [ рецепт 1 ] (recipe 1).

MUC_2-4_RU_8001013355.indb   16

10.08.2015   12:44:53