Bosch AutoCook MUC48B68RU - Инструкция по эксплуатации - Страница 14

12 

en

Operation 

[ подогрев ] (keep warm) light up. A 

rectangle lights up in the display (dotted 

lines). The keep warm function can be 

ended using button 

H

. The appliance 

subsequently switches to function 

selection mode.

If the selected preparation programme 

consists of multiple preparation steps, an 

audible signal sounds once the next step 

needs to take place. In the control panel, 

LEDs 1, 2, 3 or 4 are shown accordingly 

and button 

G

 flashes. Perform the 

following steps:

1� 

Open the lid of the appliance.

2� 

Add additional ingredients.

3� 

Close the lid of the appliance.

4� 

Start the next preparation step using 

button 

G

.

The appliance heats up the appliance 

interior until the target temperature of the 

next preparation step is reached. During 

the heating phase, lines that light up in a 

clockwise direction appear in the display. 

Once the target temperature is reached, the 

lines go out and the next preparation time 

is shown in the display. The preparation 

process starts automatically. The prepara-

tion time counts down.

Selecting a pre-configured 

preparation time

The pre-configured preparation time of 

the level [ средняя ] (medium) is shown 

on the control panel for each preparation 

programme.
The preparation time can be shortened 

[ короткая ] or lengthened [ длинная ].

1� 

Keep pressing button 

E

 until the 

desired indicator is lit. The display 

changes from [ средняя ] (medium) 

to [ длинная ] (longer) and then to 

[ короткая ] (shorter) before returning to 

[ средняя ] (medium).

The corresponding pre-configured values 

for the preparation time are shown in the 

display.

2� 

Press button 

G

 to start the preparation 

programme. 

X

“Selecting and starting a preparation 

programme” see page 10

Setting a start time delay

The start time delay can be set for the 

selected preparation programme so you 

can enjoy a freshly prepared meal at a 

specific time.

Note:

 the start time delay can only be 

set for certain preparation programmes. 

The pre-configured start time delay varies 

among these preparation programmes.

1� 

Select the preparation programme.

2� 

Press button 

A

. Button 

G

 flashes. 

“00:10” flashes in the display. 

Press button 

A

 repeatedly to increase the 

displayed time. A brief press increases the 

time by 5 minutes. A slightly longer press 

increases the time by 10 minutes. Pressing 

and holding button 

A

 for around 2 seconds 

increases the time by 30 minutes.

3� 

Press button 

G

 when the desired start 

time delay is displayed.

The desired start time delay is shown in the 

display. [ таймер ] (timer) lights up in the 

display.
The time until the start counts down. Once 

this time has elapsed, the preparation 

process starts automatically.

Notes:

■

The start time delay can be switched 

off at any time by pressing button 

G

. 

The preparation programme then starts 

immediately.

■ If “00:10” does not flash in the display, a 

start time display cannot be set for the 

selected preparation programme.

Prematurely terminating the 

current preparation step

If the ingredients are cooked ahead of time 

during one of the preparation steps, the 

step can also be terminated manually.

MUC_2-4_RU_8001013355.indb   12

10.08.2015   12:44:52