Bosch AutoCook MUC48B68RU - Инструкция по эксплуатации - Страница 13

 11

en

 Operation

4� 

Press button 

G

 to start the preparation 

programme.  

The appliance heats up the pan until the 

target temperature is reached. During the 

heating phase, lines that light up in a clock-

wise direction appear in the display.
Once the target temperature is reached, 

the lines go out and the preparation time 

is shown in the display. The preparation 

process starts automatically. 

Note: 

when the programme [ паста ] (pasta) 

or [ фритюр ] ( deep frying) is selected, a 

repeating audible signal is emitted, the 

display and button 

G

 flash until the food 

has been added and button 

G

 has been 

pressed. 
The preparation time counts down.  

Steam that is formed when preparing the 

meals exits the multi cooker via the steam 

outlet, thereby preventing the formation of 

excess pressure. Depending on the model, 

the steam outlet is fitted with a viewing 

window.

Increasing or reducing the temperature

If the current temperature was set too high 

or too low during the preparation, this can 

be increased (by +10°C max.) or decreased 

(by -10°C max.) accordingly during the 

cooking process.

To increase the temperature, press and 

hold the 

C 

button. The current temperature 

will briefly be shown on the display and will 

then increase in 1°C increments until the 

maximum value is reached (+10°C). Press 

and hold the button until the temperature is 

at the increased level desired.
To reduce the temperature, press and hold 

the 

C 

button. The current temperature will 

briefly be shown on the display and will 

initially increase in 1°C increments until the 

maximum value is reached (+10°C). Once 

the maximum value has been reached, the 

display will jump back to the minimum value 

(20°C lower). 

Press and hold the button until the tempera-

ture is at the reduced level desired.
To continue with the preparation 

programme,.press the 

G

 button.

Note:

 If the 

G 

button is not pressed, the 

preparation programme will continue with 

the temperature that was previously set.
When the preparation programme ends, 

an audible signal sounds and the indicator 

[ готово ] (ready) and button 

G

 light up. The 

display flashes and shows “00:00”.

5� 

Open the lid of the appliance and serve 

the meal that has been prepared.

W

Warning

Risk of burns!

■

During preparation, large amounts of 

steam may accumulate in the appliance. 

Open the lid with care. Do not lean over 

the lid of the appliance.

■

The pan and any inserts that are used 

may be very hot. Always use pan tongs, 

corresponding handles or oven gloves.

Notes:

■

The preparation programme can be 

stopped at any time using button 

H

. 

The appliance subsequently switches to 

function selection mode.

■

If the preparation programme features 

the keep warm function, this is switched 

on automatically once the meal is ready 

and keeps the meal warm for up to 

10 hours at 40°C. [ готово ] (ready) and 

MUC_2-4_RU_8001013355.indb   11

10.08.2015   12:44:52