Мультиметры BENNING MM 6-2 044087 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
02/ 2020
BENNING MM 6-1/ 6-2
20
Operating Manual
BENNING MM 6-1/ MM 6-2
Digital Multimeter for
- DC voltage measurement
- AC voltage measurement
- DC current measurement
- AC current measurement
- Resistance measurement
- Diode testing
- Continuity testing
- Capacity measurement
- Frequency measurement
- Temperature measurement (BENNING MM 6-1)
Contents:
1. Operating instructions
2. Safety notes
3. Scope of delivery
4. Description of unit
5. General data
6. Ambient conditions
7. Electrical data
8. Measuring with the BENNING MM 6-1/ MM 6-2
9. Maintenance
10. How to use the protective rubber holster
11. Technical data of the measuring accessories
12. Environmental note
1. Operating Instructions
This operating manual is intended for:
- electricians and
- qualified electrotechnical persons
The BENNING MM 6-1/ MM 6-2 is designed for measurements in dry surround-
ings. It must not be used in electrical circuits with rated voltages higher than
1000 V DC/ AC (for more details, see section 6 “Ambient conditions”).
The following symbols are used in the operating manual and on the
BENNING MM 6-1/ MM 6-2 itself:
Attention! Magnets might affect the correct functioning of cardiac
pacemakers and implanted defibrillators. As a user of such medical
devices, keep a sufficient distance to the magnet.
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!
The symbol indicates that the information provided in the operating
instructions must be followed with in order to avoid risks.
This symbol on the BENNING MM 6-1/ MM 6-2 indicates that the
unit is protection insulated (safety class II).
This symbol on the BENNING MM 6-2 indicates the fuses which
it contains.
This symbol on the BENNING MM 6-1/ MM 6-2 means that the
BENNING MM 6-1/ MM 6-2 complies with the EU directives.
This symbol appears on the display for a discharged battery.
This symbol indicates the “continuity-testing” application. The
buzzer provides an audible signal.
This symbol indicates the “diode-testing” application.
This symbol marks the range “capacity testing”.
(DC) voltage or current.
(AC) voltage or current.
Earth (voltage to earth).
