Ryobi MAX POWER RPW36120HI 5133002832 - Инструкция по эксплуатации - Страница 5

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

is released before you turn on the product. 

To remove the air in the hose and pump, 

connect the water supply to the pump 

using a garden hose, connect the trigger 

handle to pump using the high-pressure 

hose, disengage the trigger handle lock, 

and press the trigger until there is a steady 

flow.

■

Exercise caution to avoid slipping or falling.

■

Keep firm footing and balance.  Do not 

overreach. Overreaching can result in loss 

of balance. 

■

Only use accessories that are 

recommended by the manufacturer. The 

use of improper accessories may cause 

injury. 

■

Never leave the product running 

unattended. Turn the product off. Do 

not leave the product until it comes to a 

complete stop. 

■

Be familiar with the controls. Know how to 

stop the product and bleed the pressure 

quickly. 

■

Stay alert and exercise control. Watch what 

you are doing and use common sense. 

■

Do not use the product when you are tired, 

ill, or under the influence of drugs, alcohol, 

or medication. A moment of inattention 

while operating the product may result in 

serious personal injury.

■

Do not use the product if the switch does not 

turn it on and off. Any product that cannot 

be controlled with a switch is dangerous 

and must be repaired.

■

Keep a minimum distance of 30 cm when 

cleaning vehicles. The high-pressure jet 

may damage or burst vehicle tires and/or 

tire valves.

RESIDUAL RISKS

Even when the product is used as prescribed, 

it is still impossible to completely eliminate 

certain residual risk factors. The following 

hazards may arise in use and the operator 

should pay special attention to avoid the 

following:

■

Injury caused by the high-pressure jet

–

Avoid pointing the high-pressure jet to 

people, animals, and to yourself.

■

Injury caused by kickback

–

Always hold the handle or the trigger 

wand firmly with your two hands.

■

Injury caused by inhalation of aerosols

–

Wear appropriate respiratory mask.

■

Injury caused by exposure to noise

–

Wear ear protection.

RISK REDUCTION

It has been reported that vibrations from 

handheld tools may contribute to a condition 

called Raynaud’s Syndrome. Symptoms may 

include tingling, numbness, and blanching of 

the 

fi

 ngers, usually apparent upon exposure 

to cold. Hereditary factors, exposure to cold 

and dampness, diet, smoking, and work 

practices are all thought to contribute to the 

development of these symptoms. There are 

measures that can be taken by the operator to 

possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. 

When operating the product, wear gloves 

to keep the hands and wrists warm. 

■

After each period of operation, exercise to 

increase blood circulation.

■

Take frequent work breaks. Limit the 

amount of exposure per day. 

If you experience any of the symptoms of this 

condition, immediately discontinue use and 

see your physician.

 WARNING

Injuries may be caused, or aggravated, by 

prolonged use of a tool. When using any 

tool for prolonged periods, ensure you take 

regular breaks.

OPERATION

STARTING AND STOPPING THE PRODUCT

To start the product:

1.  Connect the nozzle to spray wand and 

connect the spray wand to trigger handle.

2.  Connect trigger handle to the water outlet 

of high pressure cleaner using the high-

pressure hose.

3.  Connect the water inlet of the high 

pressure cleaner to the water supply 

using a garden hose.

4.  Open the trigger to release the air in the 

hoses and high pressure cleaner.

5.  Install the battery to high pressure