Мойки высокого давления Ryobi MAX POWER RPW36120HI 5133002832 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
8
| English
TROUBLESHOOTING
Problem
Possible causes
Solution
Machine does
not start
Drained battery
Charge the battery.
Deffective battery
Replace with compatible battery pack.
Fuse has blown
Bring the product to an authorized service
centre for service or repair.
Fluctuating
pressure
Pump is sucking air
Check that hoses and connections are air
tight.
Valves are dirty, worn
out, or stuck
Clean and replace the part or refer to a local
distributor.
Pump seals worn out
Clean and replace the part or refer to a local
distributor.
Motor buzzes
Low voltage or low
temperature
Activate the trigger of the spay handle.
Machine stops
Fuse has blown
Bring the product to an authorized service
centre for service or repair.
Drained battery
Charge the battery.
Thermal sensor activated Leave the high pressure cleaner for 15
minutes to cool down.
Nozzle partially blocked
Clean the nozzle.
Fuse blows
Fuse too small
Bring the product to an authorized service
centre for replacement.
Machine
pulsating
Air in inlet hose/pump
Allow the product to run with open trigger until
regular working pressure resumes.
Inadequate supply of
mains water
Check that the water supply corresponds to
the speci
fi
cations required (see model tag).
Avoid using long, thin hoses.
Nozzle partially blocked
Clean the nozzle.
Water
fi
lter blocked
Clean the
fi
lter.
Hose kinked
Straighten out hose.
Machine often
starts and stops
by itself
Pump/spray handle is
leaking
Contact your nearest authorized service
centre.
Machine starts,
but no water
comes out
Pump, hoses, or other
accessory is frozen
Wait for the pump, hoses, or other accessory
to thaw.
No water supply
Connect the water inlet port to a water supply.
Water
fi
lter blocked
Clean the
fi
lter.
Nozzle blocked
Clean the nozzle.
