Lavor STM 160 WPS 8.086.0140C - Инструкция по эксплуатации - Страница 14

Мойки высокого давления Lavor STM 160 WPS 8.086.0140C - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 136
Загружаем инструкцию
background image

EN

14

directed at persons, animal, live electrical 
equipment or the machine itself.

 08WARNING:

  High  pressure  hoses,  fittings 

and couplings are important for the safety 
of the machine. Use only hoses, fittings 
and couplings recommended by the 
manufacturer. (it is extremely important 
to protect these components against 
damage by avoiding their improper use and 
protecting them against bending, knocks 
and scratches).

 09WARNING:

 Appliances not equipped 

with A.S.S. – Automatic Stop System: must 
not be left in operation for more than 2 min-
utes with the gun released. The recycled wa-
ter heats up considerably, seriously damag-
ing the pump.

 

10WARNING:

 Appli-

ances equipped with 

A.S.S – Automatic Stop System: these appli-
ances should not be left in standby for more 
than 5 minutes.

 11WARNING:

 Switch the appliance off com-

pletely (master switch on (0)OFF) whenever 
it is left unattended.

 12WARNING: 

Every machine is tested in its 

operating conditions, so it is normal for a few 
drops of water to be left inside it.

 13WARNING:

 Take care not damage the 

electric cable. If the supply cord is damaged, 
it must be replaced by the manufacturer, its 
service agent or similarly qualified persons in 
order to avoid a hazard

 13b  WARNING: 

The power cord should not 

be used to pull or lift the machine.

 14WARNING:

 Appliance with fluid under 

pressure. Keep a firm hold on the gun and be 
prepared to take the kickback pressure. Only 
use the high pressure nozzle provided with 
the appliance.

 16WARNING:

 This appliance is not intended 

for use by persons (including children) with 
reduced physical, sensory or mental capa-
bilities, or lack of experience and knowledge, 
unless they have been given supervision or 
instruction concerning use of the appliance 
by a person responsible for their safety.

 17WARNING:

 Children should be super-

vised to ensure that they do not play with 
the appliance.

 18WARNING: 

Never start the high-pressure 

cleaner without first completely unwinding 
the high-pressure hose.

 19WARNING: 

When winding and unwind-

ing the pipe take care not to cause the high-
pressure cleaner to overturn.

 20WARNING: 

Before unwinding or winding 

the hose, switch the machine off and release 
the pressure in the hose itself (switching off ).

 21WARNING: 

Risk of explosion — Do not 

spray flammable liquids.

 22WARNING: 

To ensure machine safety, use 

only original spare parts from the manufac-
turer or approved by the manufacturer.

 23WARNING: 

Do not direct the jet against 

yourself or others in order to clean clothes or 
foot-wear.

 

24WARNING:

  High  pressure  cleaners  shall 

not be used by children or untrained person-
nel.

 WARNING:

 Water that has flown through 

backflow preventers is considered to be 
non-potable.

 

XX WARNING: 

the machine shall be discon-

nected from its power source, by remov-
ing the plug from the socket-outlet, during 
cleaning or maintenance and when replac-
ing spare parts 

 

XJ WARNING:

 If an extension cord is used, 

the plug and socket must be of watertight 
construction.

 

XY WARNING:

 Inadequate extension cords 

can be dangerous.

>  SAFET Y  DEVICE

 WARNING:

 the gun is fitted with a safety 

catch. Whenever use of the machine is inter-
rupted it is important to operate the safety 
catch to prevent accidental activation of the 
jet.

-   Safety features: gun equipped with safety 

locking device, appliance equipped with 
(Class I) overload cutout, pump equipped 
with by-pass valve or shutdown device.

-   The safety button on the gun is not there to 

lock the lever during operation, but to pre-
vent its accidental operation.

 WARNING: 

The appliance is equipped with 

a motor protection device: in case of device 
intervention, wait some minutes or, in alter-
native, disconnect and re-connect the prod-
uct to the electric system. In case this prob-

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Lavor STM 160 WPS 8.086.0140C?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"