VITEK VT-6405 - Инструкция по эксплуатации - Страница 8

    English

8

Barometric pressure check

As soon as atmospheric pressure and 
altitude units and the altitude value 
are set, the meteorological station will 
automatically switch to the tempera-
ture and humidity displaying mode.   
To check the barometric pressure, 
press the 

PRESSURE/ALTITUDE but-

ton to display pressure indications.
Press this button once again to dis-
play altitude.
To return to the temperature and 
humidity displaying, press the 

▲

/

MEMORY button

.

Barometric pressure correction

Barometric pressure will be corrected 
by means of measuring of the baro-
metric pressure or altitude.

Barometric pressure measuring 

1.  Press the 

PRESSURE/ALTITUDE 

button to display barometric 
pressure indications.

. 

Press and hold the UNIT or 
PRESSURE/ALTITUDE button to 
measure barometric pressure or 
its value correspondingly.  

.  Use the 

▼

/SEARCH or 

▲

/

MEMORY button to set the 
measuring units/desired value.  

. 

Press the UNIT or PRESSURE/
ALTITUDE button to confirm.

5. 

Altitude value will be changed 
according to the new barometric 
value.  

Altitude measuring

1.  Press the PRESSURE/ALTITUDE 

button twice to display altitude.  

.  Press and hold the UNIT or 

PRESSURE/ALTITUDE button 
to measure altitude or its value 
correspondingly.  

.  Use the 

▼

/SEARCH or 

▲

/

MEMORY button to set the 
measuring units/desired value.  

.  Press the UNIT or PRESSURE/

ALTITUDE button to confirm.

5.  Barometric value will be changed 

according to the new altitude.  

TEMPERATURE AND HUMIDITY 
INDICATIONS

With every pressing of the 

▲

/MEM-

ORY button switching between the 
displaying of the following parameters 
appears:
• 

Current temperature and humidity

• 

Minimal temperature and 
humidity

• 

Maximal temperature and 
humidity

Note: during the operation of the re-
mote sensor at the temperature below 
0° C, voltage of its batteries can lower, 
reducing thus the operating radius of 
its transmitter. 

Temperature changing tendencies

Temperature changing tendencies 
are displayed as arrows (growing, 
constant, falling down) near the cor-
responding data.

Data channels switching

Press the CHANNEL button to switch 
between the data channels from the 
remote sensors (1, , ), indoors (IN)

6405IM.indd   8

12.11.2008   11:21:13