VITEK VT-6405 - Инструкция по эксплуатации - Страница 10

    English

10

alarm is switched off, the “OFF” symbol will be displayed.

.  Press the alarm AL1 button during  seconds, hours will be flashing. Use the 

+/- buttons to set the desired value.

.  Hold the AL button, the symbols will start flashing. Use the +/- buttons to 

set the desired value.

.  Press the AL1 or AL to cancel the setup mode.

5.  To switch off the alarm, press the 

AL1 or AL and the “-“button.

REPEAT OF ALARM SIGNAL

You can switch of the alarm signal for 8 minutes by pressing the SNOOZE button. 
If you do not switch off the alarm during two minutes, it will switch automatically 
to the alarm repeat mode.
Maximal quantity of repeats of the signal–  times

SPECIFICATIONS

Temperature measuring

Base unit

from -5 till +50°С
(from + till +1°F)

Remote sensor

from -15 till +60,0°С
(from 5 till +10°F)

Temperature measuring precision

0,1°С/0,°F

Relative humidity measuring
Base unit

from 5% till 90% at 5°С (77 °F)

Remote sensor

from 5% till 90% 

Relative humidity measuring precision

1%

Data transfer frequency

 MHz

Quantity of the sensors

Max.

Operation radius

Max. 0 m 

Power supply
Base unit

Net adapter 7,5 V DC, 
 batteries “AА", 1.5 V

Remote sensor

 battereis “AА"

Weight
Base unit

89 g (without batteries)

Remote unit

70 g (without batteries)

Dimensions
Base unit

90х18,9х mm

Remote sensor

56х107х mm

6405IM.indd   10

12.11.2008   11:21:13