Материнские платы GIGABYTE GA MA790GPT UD3H - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 44 -
******** System Voltage Optimized ********
System Voltage Control
Determines whether to manually set the system voltages.
Auto
lets the BIOS automatically set the
system voltages as required.
Manual
allows all voltage control items below to be configurable. (Default:
Manual)
DDR3 Voltage Control
Allows you to set memory voltage.
Normal
Supplies the memory voltage as required. (Default)
+0.050V ~ +0.750V Increases memory voltage by 0.050V to 0.750V at 0.05V increment.
Note:
Increasing memory voltage may result in damage to the memory.
NorthBridge Volt Control
Allows you to set the North Bridge voltage.
Normal
Supplies the North Bridge voltage as required. (Default)
+0.1V ~ +0.3V
Increases North Bridge voltage by 0.1V to 0.3V at 0.1V increment.
SouthBridge Volt Control
Allows you to set the South Bridge voltage.
Normal
Supplies the South Bridge voltage as required. (Default)
-0.1V ~ +0.2V
Increases South Bridge voltage by -0.1V to 0.2V at 0.1V increment.
SidePort Mem Volt Control
Allows you to set the SidePort memory voltage.
Normal
Supplies the SidePort memory voltage as required. (Default)
+0.1V ~ +0.3V
Increases SidePort memory voltage by 0.1V to 0.3V at 0.1V increment.
CHB DQS drive strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
CHB Data drive strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
CHB MEMCLK drive strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
CHB Add/Cmd drive strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CHB CS/ODT drive strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CHB CKE drive strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
Bank Interleaving
Enables or disables memory bank interleaving.
Enabled
allows the system to simultaneously access dif-
ferent banks of the memory to increase memory performance and stability. (Default: Enabled)
Channel interleave
Enables or disables memory channel interleaving.
Enabled
allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
