Материнские платы GIGABYTE GA MA790GPT UD3H - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Hardware Installation
- 20 -
1-7 Setup of the ATI Hybrid CrossFireX
™
Configuration
Combining the onboard GPU with a discrete graphics card, ATI Hybrid CrossFireX can provide significantly
advanced display performance for AMD platform. This section give instructions on configuring an ATI Hybrid
CrossFireX system.
A. System Requirements
- Windows Vista or Windows XP
(Note 1)
operating system
- An ATI Hybrid CrossFireX-supported motherboard and correct driver
- An ATI Hybrid CrossFireX-supported graphics card
(Note 2)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install an ATI Hybrid CrossFireX-supported
graphics card on the PCI Express slot.
Step 2:
Plug the display cable into the onboard graphics port on the back panel.
C. BIOS Setup
Enter BIOS Setup to set the following items under the
Advanced BIOS Features
menu:
- Set
Internal Graphics Mode
to
UMA+SidePort
.
(Note 3)
- Set
UMA Frame Buffer Size
to
256MB
or
512MB
.
(Note 3)
- Set
Surround View
to
Disabled
.
- Set
Init Display First
to
OnChipVGA
.
D. Configuring the Graphics Driver
After installing the motherboard driver in the operating system, go
to the
ATI Catalyst
™
Control Center
. Select
CrossFire
™
on the
Graphics
menu on the upper left corner and ensure the
Enable
CrossFire
™
check box is selected.
(Note 1) For Windows XP, you must install AMD chipset driver version 8.51 or later.
(Note 2) You do not have to install the graphics card driver if the motherboard chipset driver has been in-
stalled.
(Note 3) To change the
Internal Graphics Mode
or
UMA Frame Buffer Size
setting in BIOS Setup, be sure
to disable the CrossFire function in the operating system first.
