GIGABYTE GA M52LT D3P rev 3 1 - Инструкция по эксплуатации - Страница 70

Appendix

- 70 -

5-1-2  Making a SATA RAID Driver Diskette

To successfully install operating system onto RAID drive(s), you need to install the SATA controller driver dur-

ing  the  OS  installation.  Without  the  driver,  the  hard  drive  may  not  be  recognized  during  the  Windows  setup 

process. First of all, copy the driver for the SATA controller from the motherboard driver disk to a floppy disk. 

For installing Windows Vista, you also can copy the SATA controller driver from the motherboard driver disk to 

a USB flash drive. See the instructions below about how to copy the driver in MS-DOS and Windows mode. 

In MS-DOS mode: 

Prepare a startup disk that has CD-ROM support and a blank formatted floppy disk.

Steps:

1:  Boot from the startup disk. 

2:  Remove the startup disk and insert the prepared floppy disk and the motherboard driver disk (here we as

-

sume  that the drive letter for your optical drive is D:\).

3:  At  the A:\>  prompt,  type  the  following  command.  Press  <Enter>  after  the  command.  Refer  to Table  1  for 

the SATA driver directories for different Windows operating systems and change the directory in the com-
mand according to the operating system to be installed. For example, to copy the RAID driver for Windows 

XP 32-bit operating system, type: 

A:\>copy d:\bootdrv\uda\winxp\sataraid\*.* 

Figure 1

Figure 3

Figure 2

In Windows mode: 

Steps: 

1:  Use an alternative system and insert the motherboard driver disk.

2:  From your optical drive folder, double click the 

Menu.exe

 file in the 

BootDrv

 folder (Figure 2). A Command 

Prompt window will open similar to that in Figure 3.

3:  Insert the blank formatted disk. Depending on the operating system to be installed, select the controller driver 

by pressing the corresponding letter from the menu and press <Enter>. For example, from the menu in Fig-

ure 3, select 

2) NVIDIA RAID driver (XP)

 for the RAID driver for Windows XP 32-bit operating system. Your 

system will then automatically copy the driver files to the floppy disk. Press any key to exit when finished.

Table 1

Operating System

Directory

Windows XP 32-bit

Bootdrv\UDA\WinXP\sataraid

Windows XP 64-bit

Bootdrv\UDA\Win64\sataraid

Windows Vista 32-bit

Bootdrv\UDA\WinVista\sataraid

Windows Vista 64-bit

Bootdrv\UDA\WinVista64\sataraid

Windows 7 32-bit

Bootdrv\UDA\Win7\sataraid

Windows 7 64-bit

Bootdrv\UDA\Win764\sataraid