Материнские платы GIGABYTE GA M52LT D3 rev 2 3 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 33 -
BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
Whether the system will work stably with the overclock settings you made is dependent on your over-
all system configurations. Incorrectly doing overclock may result in damage to CPU, chipset, or
memory and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other unexpected
results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear
the CMOS values and reset the board to default values.)
CPU Frequency(MHz)
Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz.
Important
It is highly recommended that the CPU frequency be set in accordance with the CPU specifi
-
cations.
PCIE Clock(MHz)
Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 145 MHz.
(Default: 100)
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being used.
CPU NorthBridge Freq.
Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is
dependent on the CPU being used.
Set Memory Clock
Determines whether to manually set the memory clock.
Auto
lets BIOS automatically set the memory
clock as required.
Manual
allows the memory clock control item below to be configurable. (Default: Auto)
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency (MHz)
[200]
PCIE Clock (MHz)
[100]
CPU Clock Ratio
[Auto]
CPU North Bridge Freq.
[Auto]
Set Memory Clock
[Auto]
x Memory Clock
x6.66
1333Mhz
DRAM Configuration
[Press Enter]
DDR3 Voltage Control
[Normal]
CPU NB VID Control
[Normal]
CPU Voltage Control
[Normal]
Normal CPU Vcore
1.3250V
higf
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
