Материнские платы GIGABYTE GA 8IPE1000 rev 4 x - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 43 -
English
2-7
Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
CPU Clock Ratio
[15X]
CPU Host Clock Control
[Disabled]
x CPU Host Frequency (Mhz)
133
x AGP/PCI/SRC Fixed
66/33/100
Memory Frequency For
[Auto]
Memory Frequency (Mhz)
266
AGP/PCI/SRC Frequency (Mhz)
66/33/100
DIMM OverVoltage Control
[Normal]
AGP OverVoltage Control
[Normal]
CPU OverVoltage Control
[Normal]
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
Item Help
Menu Level
`
Set CPU Ratio if CPU
Ratio is unclocked
CPU Clock Ratio
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
CPU Host Clock Control
Disabled
Disable CPU host clock control. (Default value)
Enabled
Enable CPU host clock control.
CPU Host Frequency(Mhz)
This item will be available when
CPU Host Clock Control
is set to
Enabled
.
100Mhz ~ 355Mhz
Set CPU Host Clock from 100Mhz to 355Mhz.
If you use a 400Mhz FSB processor, please set
CPU Host Frequency
to
100Mhz
.
If you use a 533Mhz FSB processor, please set
CPU Host Frequency
to
133Mhz
.
If you use an 800Mhz FSB processor, please set
CPU Host Frequency
to
200Mhz
.
AGP/PCI/SRC Fixed
Adjust AGP/PCI/SRC clock asynchronous with CPU.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency =400Mhz,
2.66
Memory Frequency = Host clock x 2.66.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=533Mhz,
2.0
Memory Frequency = Host clock x 2.
2.5
Memory Frequency = Host clock x 2.5.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
Incorrect using these features may cause your system broken. For power end-user use only.
