Материнские платы GIGABYTE GA 8IPE1000 rev 4 x - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 39 -
English
2-4
Power Management Setup
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Power LED in S1 state
Blinking
In standby mode(S1), power LED will blink. (Default value)
Dual/Off
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Off by Power button
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec.
Press power button 4 seconds to Power off. Enter suspend if button is pressed less
than 4 seconds.
AC BACK Function
Soft-Off
When AC-power back to the system, the system will be in "Off" state. (Default value)
Full-On
When AC-power back to the system, the system always in "On" state.
Memory
When AC-power back to the system, the system will return to the Last state before
AC-power off.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled
Disable this function.
Enabled
Enable PME as wake up event. (Default value)
ModemRingOn
An incoming call via modem can awake the system from any suspend state.
Disabled
Disable Modem Ring On function.
Enabled
Enable Modem Ring On function. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type
[S1(POS)]
Power LED in S1 state
[Blinking]
Off by Power button
[Instant-Off]
AC BACK Function
[Soft-Off]
PME Event Wake Up
[Enabled]
ModemRingOn
[Enabled]
Resume by Alarm
[Disabled]
x Date (of Month) Alarm
Everday
x Time (hh:mm:ss) Alarm
0 : 0 : 0
POWER ON Function
[Disabled]
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
Item Help
Menu Level
`
