Материнские платы GIGABYTE GA 8I845GE775 G - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 33 -
English
Password Check
Setup
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
System
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.
CPU Hyper-Threading
This option appears only when the processor you install supports Intel
®
Hyper-Threading Technology.
Enabled
Enable CPU Hyper-Threading feature. Please note that this feature is only
w o r k i n g for operating system with multiprocessors mode supported. (Default
v a l u e )
Disabled
Disable CPU Hyper-Threading.
Limit CPUID Max. to 3
This option is available only when you install an Intel
®
Prescott processor (with 533MHz FSB).
Enabled
Limit CPUID Maximum value to 3 when using older OS like NT4.
Disabled
Disable CPUID Limit for Windows XP.(Default value)
No-Execute Memory Protect
(Note)
Enabled
Enable No-Execute Memory Protect function.(Default value)
Disabled
Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
(Note)
Enabled
Enable CPU Enhanced Halt (C1E) function.(Default value)
Disabled
Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2)
(Note)
Enabled
Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disabled
Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function
(Note)
Enabled
Enable CPU EIST function.(Default value)
Disabled
Disable CPU EIST function.
Init Display First
Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.
PCI
Set Init Display First to PCI VGA card.
Onboard/AGP
Set Init Display First to onboard/AGP VGA card.(Default value)
Graphics Aperture Size
This option is available only when you use the onboard VGA function.
128MB
Set Graphics Aperture Size to 128MB. (Default value)
Disabled
Disable this function.
Graphics Share Memory
This option is available only when you use the onboard VGA function.
8MB
Set Graphics Share Memory to 8MB. (Default value)
1MB
Set Graphics Share Memory to 1MB.
(Note) This item will show up when you install a processor that supports this function.
