GIGABYTE B660 - Инструкция по эксплуатации - Страница 32

- 32 -

22)  BAT (Battery)

The battery provides power to keep the values (such as BIOS configurations, date, and time information) 

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low 

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1.  Turn off your computer and unplug the power cord.

2.  Gently remove the battery from the battery holder and wait for one 

minute. (Or use a metal object like a screwdriver to touch the positive 

and negative terminals of the battery holder, making them short for 

5 seconds.) 

3.  Replace the battery.

4.  Plug in the power cord and restart your computer.

•

Always turn off your computer and unplug the power cord before replacing the battery.

•

Replace the battery with an equivalent one. Damage to your devices may occur if the battery is 

replaced with an incorrect model.

•

Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 

or uncertain about the battery model.

•

When installing the battery, note the orientation of the positive side (+) and the negative side (-) 

of the battery (the positive side should face up).

•

Used batteries must be handled in accordance with local environmental regulations.

23)  QFLASH_PLUS (Q-Flash Plus Button)

Q-Flash Plus allows you to update the BIOS when your system is off (S5 shutdown state). Save the latest 

BIOS on  a USB thumb  drive  and  plug  it  into the dedicated  port,  and  then  you  can  now flash  the  BIOS 

automatically by simply pressing the Q-Flash Plus button. The QFLED will flash when the BIOS matching 

and flashing activities start and will stop flashing when the main BIOS flashing is complete.

QFLASH_PLUS

QFLED

To enable the Q-Flash Plus function, please navigate to the "Unique Features" page of GIGABYTE's 

website for more information.