GIGABYTE 8VT800 RZC - Инструкция по эксплуатации - Страница 32

- 32 -

8VT800-RZ/8VT800-RZ-C  Motherboard

English

Frequency/Voltage Control

CPU Clock Ratio

This option will not be shown or not be available if you are using a CPU with the locked ratio.
This setup option will automatically assign by CPU detection.
For C-Stepping P4: 8X,10X~24X default: 15X
For Northwood CPU: 12X~24X default: 16X
The option will display "Locked" and read only if the CPU ratio is not changeable.

Auto Detect PCI/DIMM Clk

Disabled

Disable auto detect PCI/DIMM Clk.

Enabled

Enable auto detect PCI/DIMM Clk. (Default value)

Spread Spectrum

Disabled

Disable spread spectrum.

Enabled

Enable spread spectrum. (Default value)

CPU Host Clock Control

Note: Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.

Disabled

Disable CPU Host Clock Control. (Default value)

Enabled

Enable CPU Host Clock Control.

CPU Clock

Incorrect using it may cause your system broken. For power End-User use only!

100~166

For 100MHz CPU:Set CPU Clock to 100MHz~166MHz.

133~199

For 133MHz CPU:Set CPU Clock to 133MHz~199MHz.

200~250

For 200MHz CPU:Set CPU Clock to 200MHz~250MHz.

ø

  This item will be available when "CPU Host Clock Control" is set to Enabled.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Frequency/Voltage Control

CPU Clock Ratio

[15X]

Auto Detect PCI/DIMM Clk

[Enabled]

Spread Spectrum

[Enabled]

CPU Host Clock Control

[Disabled]

ø

CPU Clock

100MHz

DRAM Clock

[By SPD]

AGP OverVoltage Control

[Auto]

DIMM OverVoltage Control

[Auto]

higf

: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Save Default

F7: Optimized Defaults

Item Help

Menu Level

}