Материнские платы GIGABYTE 8VT800 RZC - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 29 -
BIOS Setup
English
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1. (Default value)
S3(STR)
Set ACPI suspend type to S3.
USB Device Wakeup From S3(When ACPI Suspend Type is set [S3/STR])
USB device wakeup From S3 can be set when ACPI standby state set to S3/STR.
Enabled
USB Device can wakeup system from S3.
Disabled
USB Device can't wakeup system from S3. (Default value)
Soft-off by PWR-BTTN
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec.
Press power button 4 sec to Power off. Enter suspend if button is pressed
less than 4 sec.
AC Back Function
Soft-Off
Always in Off state when AC back. (Default value)
M e m o r y
System power on depends on the status before AC lost.
Full-On
Always power on the system when AC back.
Keyboard Power On
This feature allows you to set the method for powering-on the system.
The option "Password" allows you to set up to 8 alphanumeric characters to power-on the system.
The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system.
P a s s w o r d
Enter from 1 to 8 characters to set the keyboard power on password.
Disabled
Disabled this function. (Default value)
Keyboard 98
If your keyboard have "POWER Key" button, you can press the key to
p o w e r o n y o u r s y s t e m .
Mouse Power On
Disabled
Can't Power on system by Mouse Event. (Default value)
Enabled
Can Power on system by Mouse Event.
PME Event Wake Up
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled
state.
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disabled
Disable this function.
Enabled
Enable PME as wake up event. (Default value)
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Disable this function. (Default Value)
Enabled
Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
E v e r y d a y , 1 ~ 3 1
Time (hh: mm: ss) Alarm :
(0~23) : (0~59) : (0~59)
