Маршрутизаторы Yeastar TG100G - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

TG100 User Guide
55/93
Procedure
1.
Navigate to
System
>
System Preferences
>
Date and Time
.
2.
Select your current and correct
Time Zone
.
3.
(Optional) Enable the
Daylight Saving Time
if you need it in your place.
4.
Select
Automatically Synchronize With An Internet Time Server
, and enter the
NTP Server address
. The system will adjust its internal clock to a central network
server.
Note
: Make sure the system can access the Internet.
5.
You can also select
Set Date & Time Manually
and enter the date and time.
6.
Click
Save
.
A reboot prompt will display on the bottom of the web page.
7.
Click
Reboot Now
to reboot the TG gateway.
Upload Custom Prompts
The default voice prompts and announcements in the system are suitable for almost
every situation. However, you may want to use your own voice prompt to make it more
meaningful and suitable for your case. In this case, you need to upload a custom
prompt to the system and apply it to the place you want to change.
Prerequisite
Yeastar TG gateway supports “.WAV”, “.wav”, and “.gsm” audio file. The audio file size
must be smaller than 1.8 MB. The supported wav file format:
pcm 8kHz, 16bit, Mono, 16Kb/s
alaw/ulaw 8kHz, Mono, 1Kb/s
gsm 6.10 8kHz, Mono, 1Kb/s
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)