ASUS RT-AX89X AX6000 - Инструкция по эксплуатации - Страница 78

78

•   

Local IP

: Key in the client’s LAN IP address. 

NOTE:  

 Use a static IP address for the local client to make port 

forwarding work properly. Refer to section 

4.2 LAN

 for information.

•   

Local Port

: Enter a specific port to receive forwarded packets. 

Leave this field blank if you want the incoming packets to be 

redirected to the specified port range.

•   

Protocol

: Select the protocol. If you are unsure, select 

BOTH

.

To check if Port Forwarding has been configured successfully:

•    Ensure that your server or application is set up and running.
•    You will need a client outside your LAN but has Internet 

access (referred to as “Internet client”). This client should not 

be connected to the ASUS router.

•    On the Internet client, use the router’s WAN IP to access the 

server. If port forwarding has been successful, you should be 

able to access the files or applications.

Differences between port trigger and port forwarding:

•    Port triggering will work even without setting up a specific 

LAN IP address. Unlike port forwarding, which requires a 

static LAN IP address, port triggering allows dynamic port 

forwarding using the router. Predetermined port ranges are 

configured to accept incoming connections for a limited 

period of time. Port triggering allows multiple computers 

to run applications that would normally require manually 

forwarding the same ports to each PC on the network.

•    Port triggering is more secure than port forwarding since the 

incoming ports are not open all the time. They are opened 

only when an application is making an outgoing connection 

through the trigger port.