ASUS RT-AX89X AX6000 - Инструкция по эксплуатации - Страница 58

58

NOTE: 

  WPS supports authentication using Open System, WPA-Personal, 

and WPA2-Personal. WPS does not support a wireless network that uses 

a Shared Key, WPA-Enterprise, WPA2-Enterprise, and RADIUS encryption 

method.

3.  In the WPS Method field, select 

Push Button

 or 

Client PIN

code. If you select 

Push Button

, go to step 4. If you select 

Client PIN

 code, go to step 5.

4.  To set up WPS using the router’s WPS button, follow these 

steps:

a. Click 

Start

 or press the WPS button found at the rear of the 

wireless router. 

b. Press the WPS button on your wireless device. This is 

normally identified by the WPS logo.

NOTE: 

  Check your wireless device or its user manual for the location of 

the WPS button.

c. The wireless router will scan for any available WPS devices. 

If the wireless router does not find any WPS devices, it will 

switch to standby mode.

5.  To set up WPS using the Client’s PIN code, follow these steps:

a. Locate the WPS PIN code on your wireless device’s user 

manual or on the device itself.  

b. Key in the Client PIN code on the text box.
c. Click 

Start 

to put your wireless router into WPS survey mode. 

The router’s LED indicators quickly flash three times until the 

WPS setup is completed.