ASUS RT-AX89X AX6000 - Инструкция по эксплуатации - Страница 38

38

4.  On the 

user-defined QoS rules

 page, there are four default 

online service types – web surf, HTTPS and file transfers. 

Select your preferred service, fill in the 

Source IP or MAC

, 

Destination Port

, 

Protocol

, 

Transferred

 and 

Priority

, then 

click 

Apply

. The information will be configured in the QoS rules 

screen.

NOTES:

•  To fill in the source IP or MAC, you can:

  a)  Enter a specific IP address, such as "192.168.122.1".

  b)   Enter IP addresses within one subnet or within the same IP 

pool, such as “192.168.123.*”, or “192.168.*.*”

  c)  Enter all IP addresses as “*.*.*.*” or leave the field blank.

  d)   The format for the MAC address is six groups of two 

hexadecimal digits, separated by colons (:), in transmission 

order (e.g. 12:34:56:aa:bc:ef )

•  For source or destination port range, you can either:

  a)  Enter a specific port, such as “95”.

  b)   Enter ports within a range, such as “103:315”, “>100”, or  

“<65535”.

• The 

Transferred

 column contains information about the upstream 

and downstream traffic (outgoing and incoming network traffic) for 

one section. In this column, you can set the network traffic limit (in 

KB) for a specific service to generate specific priorities for the service 

assigned to a specific port. For example, if two network clients, PC 

1 and PC 2, are both accessing the Internet (set at port 80), but PC 1 

exceeds the network traffic limit due to some downloading tasks, PC 

1 will have a lower priority. If you do not want to set the traffic limit, 

leave it blank.