Магнитолы Soundmax SM-CMD5003 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
Backlight: select LOW, MID or HIGH display backlight level.
RDS and Radio page
Stereo: Select ON (stereo reception mode) or OFF (mono reception). When the received stereo signal is
weak, switch to mono mode to improve the signal. The function is available only in FM bands.
Local: Select ON (only local station reception) or OFF (local and distant station reception). The function is
available only in FM bands.
TA volume: Adjust level of TA volume.
Retune: Long/Short. RETUNE refers to the time period the unit allows for radio scan when reception is
interrupted. “Short” represents a time period of 30 seconds and “Long” represents a time period of 90
seconds.
PI: Mute/Sound. PI sound refers to the reception noise when the AF function tries to scan alternative
frequency.
REG: REG ON (the receiver accepts regional variants of the tuned station with REG icon turned on), and
REG OFF (the receiver ignores regional variants).
Mask: DPI/ALL. During MASK DPI mode, the unit will mask only the AF which has different PI, this is the
default mode; during MASK ALL mode, the unit will mask the AF which has different PI and no RDS signal
with high field strength.
EON TA: DX/Local. If you want to receive information from local stations only, select EON TA Local mode.
Otherwise, select EON TA DX mode.
TA: Seek/Alarm. In TA SEEK mode, the unit will seek for traffic announcement program when TA is
pressed; in TA ALARM mode, no TA/TP is displayed and the alarm is set off.
General page
Dual: Select ON or OFF the Dual zone function.
Key: Use buttons at CURRENT (buttons perform operations for the current mode of the front zone) or
DVD (buttons perform DVD functions). This function is available only if ON is selected for DUAL.
Tilt angle: Select the monitor tilt angle.
Tilt IN/OUT: Select the monitor in/out position.
Clock display: Select ON (clock is displayed) or OFF (clock is not displayed).
Clock hour: select 12-hour or 24-hour clock display mode.
