Магнитолы Soundmax SM-CMD3015 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
20
Mono/Stereo control (in FM radio mode)
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows ST ON (ST
OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between ST
ON/OFF. ST ON means stereo reception of the signal; ST OFF means mono reception mode. Or press
STEREO button on the RC or touch MO/ST icon on the screen to switch stereo reception on/off.
Improvement of reception of distant stations can be done by selecting mono mode, which may cut down
some reception noise.
Local radio station search
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOC ON (LOC
OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between LOC
ON/OFF. LOC ON means that only local stations are received; LOC OFF means that both local and distant
stations with weak and strong signal are received. Or press LOCAL button on the RC or touch LOC/DX icon
on the screen to switch between local and distant station reception.
RDS function
RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not
available in you area, the following service is not available, either.
AF (Alternative Frequencies) function
Press AF button on the panel or touch AF icon on the screen to turn the AF function on or off. When the
function is on, AF symbol will blink on the display.
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search
another station with the same PI (Program Identification) as the current station but with a stronger signal,
so that you do not have to retune the stations when driving between different transmitter coverage areas.
PS (Program Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode.
TA (Traffic Alarm) function
Press TA button on the panel or touch TA icon on the screen to turn TA function on or off. When on, the TA
symbol will show on the display.
